Results forrussia trading companiesfrom 8109 Products.
|
Front Sight Made of nylon material, it is lightweight and foldable, saving space. Can be mounted on a standard Picatinny rail for easy removal. Material Nylon Size 64*33*22 Weight ...
|
|
|
|
Breacher(Anti-bouncer Device)Locknut Threaded to the muzzle of the barrel, it is used to lock the anti-bouncer device and effectively prevent it from loosening. Apply to PD22SG. ...
|
|
|
|
Lengthened Choke The barrel rifling choke is equipped with rifling (rifling twist 48.13 ) on the inside of the barrel rifling, which significantly increases the shotgun’s range. ...
|
|
|
|
Barrel Protection Cap When the muzzle devices are not required, it is fastened to the muzzle to protect the muzzle thread. Metric thread for the CCVT12/PDM12-1 external magazine ...
|
|
|
|
Magazine Cap Assembly Magazine cap is used to connect the receiver assembly to the barrel assembly and can be used separately. For ease of portability, magazine cap parts with a ...
|
|
|
|
Locking Block Stud Assembly The locking block stud assembly is composed of a locking block and a locking block stud, which plays a locking role in firearms and is suitable for 20Ga...
|
|
|
|
Extractor Spring The spring is made of high-quality carbon spring steel wire tempered at high temperature. Reliable performance. Adapted 20Ga. pump shotgun. Material High quality ...
|
|
|
|
Extractor Spring The spring is made of high-quality carbon spring steel wire tempered at high temperature. Reliable performance. Adapted 12Ga. pump shotgun. Material High quality ...
|
|
|
|
Rear Sight Made of nylon material, it is lightweight and foldable, saving space. Can be mounted on a standard Picatinny rail for easy removal.Used for PDMS12-3 aming. Material ...
|
|
|
|
Locking Block Stud Assembly The locking block stud assembly is composed of a locking block and a locking block stud, which plays a locking role in firearms and is suitable for 12Ga...
|
|
|
|
Extractor The extractor can effectively extract the fired shell or the bullet in the ready position from the chamber reliably. Adapted 20Ga. Pump shotgun Material Steel Size 12.97...
|
|
|
|
Shell retracted mount The ejector and the ejector spring are riveted on the receiver to ensure smooth shelling and rebounding. Apply to 12Ga. barrel guns. Material Steel Size 62.2...
|
|
|
|
Ejector The ejector and the ejector spring are riveted on the receiver to ensure smooth shelling and rebounding. Apply to 12Ga. barrel guns. Material Steel Size 57*6.5*5mm...
|
|
|
|
Ejector Spring The ejector spring acts as a ejection of the shells and the ejection of the rebound. Apply to PY20 barrel guns. Material Steel Size 56.7*5.5*3.8mm(Thickness:0.8mm) ...
|
|
|
|
Ejector Rivet(Front) The ejector rivet(front) play a role in riveting the ejector, ejector spring and the receiver into a solid and firm body. Material Steel Size φ3.5*8mm Weight 0...
|
|
|
|
Action Assembly Handheld back and forth pull to complete the feeding, rebounding or shell ejection action. The movement is smooth. The forend tube nut fastens it to the forend. ...
|
|
|
|
Magazine Spring 5 rounds of magazine spring in the cooperation of the magazine cap and the magazine follower, play a role in stabilizing the supply of shells to the gun, the ...
|
|
|
|
Breech Bolt Carriers for parts such as firing pins, locking block and slide drives. Reciprocating motion smoothly locks and unlocks the gun. Material Steel Length 87.5mm Weight 0...
|
|
|
|
Breech Bolt Carriers for parts such as firing pins, locking block and slide drives. Reciprocating motion smoothly locks and unlocks the gun. Material Steel Length 76.6mm Weight 0...
|
|
|
|
Firing Pin Retractor Pin The opening design of the end tightens the connection between the firing pin and the bolt, effectively preventing shedding caused by disassembly. Material ...
|
|
|