Qingdao JinDingEn Rubber machinery Co.ltd |
|
Scrap Tire Processing Equipment - Ring Steel Wire Separating Machine,Coil Wire Separator
Wire loop cutting machine is used for tire sidewall side of the cut to the next step of segmentation. Circular platform placed on the tire, rotate the middle of the hand wheel, jaw card holder will be jammed solid inner tire, start the power, rotate the work platform, cutting tools as needed into the knife, slowly cut into the tires, step by step. Until the cut side of the tire.
Motor power | Processing range | Processing amount | Overall dimension | Weight |
2.2kw | 750-1200 tyre | 25-30 strips/H | 1150×850×1200 | 0.5 ton |
Billet cutter can cut circles machine to remove the wire tire sidewall cut into stripe, and the width is adjustable. Two circular knives for special materials, hard and durable, be used rep-eatedly grinding for no more than 1200 steel tiers.
Motor power | Processing ability | Processing diameter | Discharge size | Overall dimension | Weight |
5.5kw | 10 strips/H | <1200 | 35-55 | 1230×650×1580 | 0.8 ton |
Slabbing Cutter can cut a tire strips, cut block, tool for the alloy cutting tools, nearly 9-16tons per day, the tool is not sharp grinding can be repeated.
Motor power | Processing ability | Discharge size | Overall dimension | Weight |
7.5kw | 0.8-1 ton/H | 35×35×35 | 780×550×1210 | 0.6 ton |
Tire wire ring in the mouth with good elasticity, high hardness, is an ideal material for making sand blasting, the steel and rubber tire circle easily separated, before the burning of the separation methods, this original approach is slow, resulting in W-ire annealing, loss of elasticity, hardness and advantages, the use of sharp decline in the value and make a great environment form pollution after burning rubber into a pure waste can no longer use.
The circle through the double slot wire separator roll extrusion, and two tanks roll speed difference will ring in the mouth than the wire separation, maintaining good physical properties of steel, rubber can re-use and avoid the environmental pollution, is specifically to deal with waste tires circle the best equipment.
Motor power | Processing ability | Discharge size | Overall dimension | Weight |
15kw | Each circle/min | 1.2×500×20 | 1500×1100×1200 | 1.8 ton |
Fine milling machine dedicated to the further refinement of powder 20-30mesh, 80-100mesh fineness can be achieved.
Motor power | Processing ability | Discharge size | Overall dimension | Weight |
15kw | 1-3 T/Mesh | 40-80 Mesh | 2000×1100×3000 | 1.5 ton |
Qingdao JinDingEn Rubber Machinery Co.Ltd is a key enterprise in the field of rubber machinery. Our products mainly export to southeast countries and win high reputation among our customers.
Our capital reserves and technical skills are strong
enough and in the meanwhile, we have a full set of advanced
facilities.Implementing scientific management and being extremely
strict to the International Quality Management System to monitor
the entire process in order to ensure our customers the best
quality.