|
Trade Verify
Address: No.62, Xinhe Management of Area, Wanjiang District, Dongguan city, Guangdong province ,China
Contact name:Fiona Zhong
Dongguan Zhongli Instrument Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
2000kN/3000kN Concrete Compression Pressive Pressure Testing Machine
Introduction:
The testing machine is mainly used for brick, stone, cement, concrete and other building materials, compressive strength test,also used to test the compressive performance of other materials.
Spatial adjustment method:
Through the hand wheel rotation, the adjustment of space to achieve compression.
Hydraulic System:
The oil tank is sucked through the filter screen and be inhaled pump oil ,through the petroleum pipeline of oil pump transport to oil valve,When the hand wheel to send off the oil, due to the role of oil will push the piston, the oil from the return pipe to tank, when the hand wheel to open get the oil, then the working fluid into the fuel tank through the tubing, pressure tubing through and through oil return valve to tank.
Control system:
This machine adopts hydraulic loading, electronic measuring force, with a load of figures, the loading rate shows ,the maximum load to maintain, as well as overload protection and power data retention and other functions.
Safety protection device:
When the test force more than 3% of the maximum test force, the overload protection, oil pump motor shut down.
Fixture:
Whole set fixtures include: a set compression platen fixture
Main performance technical specifications:
| Max load | 2000kN | 2000kN | 3000kN |
| Test force measuring range | 4%-100%FS | ||
| Test Force showed the relative error | ≤indicating value±1% | ≤indicating value±1% | <indicating value±1% |
| silk pole adjustment method | Manual operation | power-driven | power-driven |
| Test Force Resolution | 0.01kN | 0.01kN | 0.01kN |
| Piston diameter | φ250mm | φ250mm | Φ290mm |
| Piston stroke | 50mm | 50mm | 50mm |
| Hydraulic pump rated pressure | 40MPa | ||
| Bearing plate size | 250mm×220mm | φ250mm×φ220mm | φ300mm×φ300mm |
Advantage Service:
1. We have R&D, designing department which can not only provide technological machines but also can satisfy special customized needs of our clients.
2. Over 50 years’ manufacturing experience, advanced machine and sophisticated handcraft.
3. There are TWO laboratories in our factory: Environmental laboratory and Physical laboratory.
4. Our factory have adequate stock monthly, which can meet customers’ urgent needs.
5. Annual sales over 1,000,000USD; 30,000㎡manufacturing base, equipped with 120 technicians, we are capable to take large budget project.
Technical Support:
1. SUS Stainless plate is cut by advanced leaser machine which can ensure accuracy; All machine appearance is anti-rust electrostatic painting;
2. Imported electronic components: ABB/Siemens/Panasonic/Saginomiya/Danfoss/Emkarate/Omron/Philips and imported compressor:BOEK/TECUMSEH, which can keep the machine’s service life over 10 years.
After-sale Service:
1. We promise 14 month’s warranty and lifetime maintenance.
2. During the warranty time, any components broken is FREE to change, and we offer FREE picture, video instruction after your purchasing of our machine.
3. All machine is sent with a packing list, operation instruction(paper file), warranty certificate(with valid date) and other accessories.
Package:
We pack machine with plastic wrap (water proof), then pack with poly wood board,
cystosepiment inside the board and machine for fixture.
