Purified Water Treatment System Reverse Osmosis Desalination Plant 30t/h Outlet Flow

Purified Water Treatment System Ro Desalination System Reverse Osmosis Desalination Plant
 
Product Introduction of RO Water Treatment System

RO system is widely used in water treatment, purification for tap water, well water, underground water, borehole salty water, brackish water and seawater, pure water and ultra-pure water production. Application area such as, food processing, bottled drinking water, home use drinking water, power stations, electronic industries, cosmetics production, pharmaceuticals manufactories, and medical treatment(such as hemodialysis). It is a key equipment for pure water plant and ultrapure water equipment.

The Basic Working Principle of RO Water Treatment System
After a special high-pressure pump, when the raw water is added to a pressure of 6-20 kg, the raw water permeates through the reverse osmosis membrane with a pore size of only 0.0001 microns under the action of pressure. Chemical ions, bacteria, fungi, and virions cannot pass through, and are discharged with wastewater. Only water molecules and solvents with a volume of less than 0.0001 microns are allowed to pass through.
 
Technical Specifications of RO Water Treatment System

Advantages of RO water treatment system:
(1) pressure is the main force in RO separation process, which does not go through the phase transition of energy intensive exchange and has low energy consumption; (2) RO does not need a lot of precipitants and adsorbents, and its operating cost is low; (3) RO separation engineering is simple in design and operation and short in construction period; (4) RO purification efficiency is high and environmentally friendly. Therefore, RO technology has been widely used in domestic and industrial water treatment, such as desalination of seawater and brackish water, production of medical and industrial water, preparation of pure and ultra-pure water, industrial wastewater treatment, food processing concentration, gas separation, etc.
 
Process flow of RO Water Treatment System
the source water is pumped into the quartz sand filter to get rid of rust, sediment, colloidal substances suspended solids, fibrous materials, then to active carbon filter to adsorption of hydrocarbon compounds, removal of the color, odor, a large number of biological organisms, reducing the water I halogen and pesticide pollutants, water and other contaminants trichloride, next step is go to the sodium filter to soften water, reduce water hardness, the water can be effectively adsorbed metal ions, thereby removing the scale in water, then to precison filter to get rid of the very tiny particles,these step we call it pretreatment, after that the pretreated water go into the reverse osmosis device,since the reverse osmosis membrane pore size is very small ,it will effectively remove the water soluble salts, colloids, microorganisms, organic matter, etc. finally the source water is treated to output of pure water.
 

 
Photos of reverse osmosis water treatment system

 
 

FAQ:
 
1. What is the design water yield of ro membrane element? (except anti-pollution membrane and seawater desalination membrane)
 
Model 4040 is designed by 0.25m3/h
 
Model 8040 is designed by 1-1.2m3/h
 
2. What is the material of mechanical filter?
 
Carbon steel, stainless steel, fiberglass
 
3.What are the multi-way control valves?
 
Manual control valve, automatic control valve
 
Multi - way control valve is divided into: filter valve and softening valve
 
Automatic control valve is divided into: time type and flow type.
 
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean source, etc.