500LPH Water Purifying System Two Stage Reverse Osmosis Pure Water
Equipment
Adsorption - adsorption method is the use of porous solid material,
adsorption of some pollution substances in the water on its
surface, so as to achieve the purification of water. Adsorption can
remove pollutants including: organic matter, colloid, residual
chlorine, but also remove chroma and smell.
Activated carbon adsorption - activated carbon is made of
bituminous coal, anthracite, fruit shell or wood chips and other
raw materials by carbonization and activation of black porous
particles. The physical characteristics of activated carbon mainly
refers to the pore structure and distribution, the formation of
various shapes and sizes of pores in the activation process, thus
forming a huge specific surface area, and water contact surface is
very large, so the adsorption capacity is very strong. Activated
carbon can not only absorb all kinds of pollutants in water, but
also can absorb pollutants such as SO2 in waste gas, so it has a
wide range of uses in environmental protection, water treatment and
other fields.
Technical Specifications of RO Water Treatment System
500LPH Reverse Osmosis System |
Model | JFRO-500L |
Host Size | 800x600x1600mm (can be customized) |
Power | 1.5KW |
Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
Operating Pressure | 0.8-1.2MPa |
Recovery Rate | 50% |
Designed Water Inlet | 1000L/h |
Outlet Flow | 500L/h |
Desalination Rate | ≥99.5% |
RO Frame | SUS304 |
Membrane Size | 4040 |
Membrane Elements | DOW /Hydranautics/Troy/ Vontron (Optional) |
Number of Membranes | 2 |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
Tank Material | SS/FRP (Optional) |
Control Valve | Manual/Automatic |
Control Valve Brand | FLECK/RUNXIN |
Membrane Housing | SS/FRP (Optional) |
Pipe Material | U-PVC, Stainless steel (Optional) |
Precision Filter (security filter) - To remove very small
particles. Ordinary sand filter can remove very small solid
particles, so that the turbidity of the effluent reaches about 1,
but the effluent still contains a large number of particles in the
size of 1~5μm, these particles are sand filter can not be removed,
although the particles are very small, but if directly into the
reverse osmosis host, under the action of RO film concentration, it
will still cause membrane element pollution, to remove these
particles, You have to use sophisticated filtration. Precision
filter is often set in the pressure filter, sometimes also set in
the whole pretreatment process is not the end to prevent broken
filter material, activated carbon, resin and so on into the reverse
osmosis system, as far as possible not to the last process produced
particles to the next process. The aperture of the filter hole
should match the impurities contained in the water to avoid being
too thick or too fine.
Oxidation - Oxidation is a chemical treatment that uses strong
oxidants to oxidize and decompose contaminants in water. For
reverse osmosis system pretreatment, oxidation is usually to remove
two types of substances: ① organic matter ② iron, manganese
Softening - Softening is a treatment that chemically removes
hardness from water. It is divided into ion exchange softening and
pharmaceutical softening. Ion exchange softening is commonly used
in reverse osmosis pretreatment. Ion exchange softening refers to
the use of ion exchanger, the water hardness component calcium
magnesium plasma with ion exchanger effectively exchange groups
(usually sodium ions) reaction, so that the water to achieve the
effect of softening.
Process flow of RO Water Treatment System
Raw water → Raw water tank → Raw water pump → Multi-media filter
(quartz sand filter) → Activated carbon filter → Soft water
processor → Precision filter → High pressure pump → Primary reverse
osmosis (RO) device → Purified water tank → High pressure pump →
Two Stage reverse osmosis → ultraviolet sterilization device →
water point.
Photos of reverse osmosis water treatment system
FAQ:
1. What is the design water yield of ro membrane element? (except
anti-pollution membrane and seawater desalination membrane)
Model 4040 is designed by 0.25m3/h
Model 8040 is designed by 1-1.2m3/h
2. What is the material of mechanical filter?
Carbon steel, stainless steel, fiberglass
3.What are the multi-way control valves?
Manual control valve, automatic control valve
Multi - way control valve is divided into: filter valve and
softening valve
Automatic control valve is divided into: time type and flow type.
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean
source, etc.