Active Member
|
[China]
Address: 15F, Block B, FRD International Wealth Center, Fengcheng 12th Road, Weiyang District, Xi’an,Shaanxi, China 710018
Contact name:Chloe Cheung
Jufu Water Technology Co., Ltd |
|
|
30TPD MBR Membrane Bioreactor Plant for Wastewater Treatment
Product Description of Wastewater Treatment System
Membrane Bioreactor (MBR) Wastewater treatment technology uses a membrane or a ‘perm-selective’ membrane such as a microfiltration or ultrafiltration. MBR Membrane Bioreactor MBR is a new type of high efficiency wastewater treatment process combining high efficiency membrane separation technology with traditional fully activated sludge method, which replaces the secondary sedimentation tank in the traditional activated sludge method with membrane modules to retain a large number of microbial flora in the biological system, which leads to an increase in the number of microbial flora and biological species in the system and improves the wastewater treatment capacity and efficiency.
Characteristics of Wastewater Treatment System
The MBR process has a number of significant advantages over the conventional activated sludge method, such as:
In the MBR process, the activated sludge concentration is generally controlled at 7000 to 18000 mg/L. This is equivalent to five times the sludge concentration of the conventional sludge system. As a result, the biochemical treatment efficiency of the MBR process is greatly improved and the floor space of the reaction tank can be saved by 60%. In addition, since the membrane modules replace the deep treatment processes such as clarification and filtration, these equipment can be eliminated, thus saving the floor space of the entire wastewater treatment plant.
Generally speaking, wastewater treated by MBR process has almost no detectable suspended matter and turbidity less than 1. Combining biochemical treatment with membrane separation technology, MBR produced water can be used for almost all non-potable reuse applications - agricultural green irrigation, boiler make-up water (RO pretreatment) and industrial process water. The MBR process is also effective in reducing the presence of pathogenic bacteria, such as E. coli and Cryptosporidium spp.
Technical Specification of Wastewater Treatment System
| Model | Volume of water treated(m3/d) | Dimension L×W×H(m) | Weight(t) | Running Weight(t) | Power Installed(KW) | Running Power(KW) |
| JFWS-M-5 | 5 | 2.5×1.0×1.5 | 1.43 | 6 | 4.8 | 2.95 |
| JFWS-M-10 | 10 | 2.5×1.5×2.0 | 2.2 | 11.4 | 4.8 | 2.95 |
| JFWS-M-20 | 20 | 5.0×1.5×2.0 | 3.08 | 21.36 | 4.8 | 2.95 |
| JFWS-M-40 | 40 | 5.0×2.0×2.5 | 4.29 | 34.68 | 6.6 | 3.85 |
| JFWS-M-50 | 50 | 6.0×2.0×2.5 | 4.73 | 41.16 | 6.6 | 3.85 |
| JFWS-M-80 | 80 | 9.0×2.25×2.5 | 6.6 | 67.92 | 6.6 | 3.85 |
| JFWS-M-100 | 100 | 10.5×2.25×2.5 | 7.37 | 78.96 | 6.6 | 3.85 |
| JFWS-M-120 | 120 | 12.0×2.25×2.7 | 8.58 | 96.84 | 9 | 5.25 |
| JFWS-M-150 | 150 | 12.5×3.0×2.7 | 9.79 | 122.4 | 9 | 5.25 |
| JFWS-M-180 | 180 | 13.0×3.0×2.7 | 10.67 | 138 | 9 | 5.25 |
| JFWS-M-200 | 200 | 15.0×3.0×2.7 | 12.98 | 159.24 | 12.4 | 7.3 |
| JFWS-M-250 | 250 | 18.5×3.0×2.7 | 14.3 | 195.12 | 15.8 | 9.2 |
| JFWS-M-300 | 300 | 23.0×3.0×2.7 | 17.27 | 242.4 | 15.8 | 9.2 |
Workflow Chart of Containerized Water Treatment Plant
Benefits of Containerized Water Treatment Plant
1. The hydraulic retention time is separated from the sludge age. The MBR membrane technology can intercept all microorganisms in the water, realize the separation of the hydraulic retention time and the sludge age, make the operation control more flexible, and make it possible to extend the sludge age. This is conducive to the growth and reproduction of slow-proliferating nitrifying bacteria, and the denitrification efficiency is greatly improved. At the same time, because the system has a long sludge age, the amount of excess sludge produced is very small.
2. The effluent quality is higher than that of traditional
biochemical processes. Membrane technology can not only trap
microorganisms in the water, but also trap some of the insoluble
pollutants of macromolecules, prolong the residence time of
pollutants in the reactor, and increase the removal rate of
refractory pollutants. At the same time, because the mud age is
long, the denitrification effect is good, and the effluent is
basically free of SS, the effluent quality of MBR is better than
that of the traditional process.
3. It can effectively reduce the concentration of pollutants. As a biochemical treatment process, the MBR membrane can convert organic matter into carbon dioxide and water, and nitrogen pollutants can be converted into nitrogen. It can also reduce the conductivity of raw water, which makes the subsequent membrane treatment process load a lot Alleviate, prolong the life of the membrane, increase the water production rate, and reduce the concentration of the concentrated solution.
4. The remaining sludge output of this process is low, which
reduces the cost of sludge treatment.
Applications of Containerized Water Treatment Plant
Municipal sewage treatment and water reuse.
Hospital wastewater treatment and water reuse.
Residential communities,highway service areas,life sewage treatment.
Chemical, petroleum, chemical fiber wastewater brewing, beer and other industries wastewater treatment.
FAQ
Q: What kind of information need to be provided for product selection?
A: What ‘s the raw source of your water? If possible, please provide Water Analysis Report.
B: What’s your request on the output capacity of the equipment?
C: What’s the application for the project?
D: What’s the piping standard applied in your local market?
Q: How can I choose the products which can be perfectly match my case?
A: Tailor-made solutions will be provided by Jufu’s professional engineer based on your requirements.
All the pain-points of the project will be highlighted and solved for overall optimization.
Q: What’s the leadtime?
A: It depends. 3-5 weeks for general products.
