Active Member
|
[China]
Address: Address: 1floor, C building, Indstrial 3 Road No.38, Jiahe Wanggang, Baiyun District,GuangZhou, China.
Contact name:Andrea Xu
Guangzhou Kai Yuan Water Treatment Equipment Co., Ltd. |
|
|
Pure Water Treatment Plant Ro System / Residential Reverse Osmosis Unit
Water Treatment Plant Ro System Introduction
Reverse Osmosis system (RO) is the best water purification system.
It includes household revere osmosis system, commercial revere osmosis system and industrial revere osmosis system. Our industrial reverse osmosis system can deal with different source water like tap water, rainwater, city water, underground water with wide applications in Food, Hotels, Hospitals, Restaurant, Cinemas......
The solute is retained on the pressurized side of the membrane and the pure solvent is allowed to pass to the other side. To be "selective", this membrane should not allow large molecules or ions through the pores (holes) but should allow smaller components of the solution (such as solvent molecules) to pass freely.
| 500lph reverse osmosis water system purifier ro plant designed with pre-treatment multimedia filters, it including sand filter, carbon filter,antisludging agent and security filter, which can remove big suspending particles, reverse osmosis unit can filtrate over 99% dissolved solid,It is the most precison filter process. |
| 1---Quartz sand filter |
Function:Mainly remove the mud, suspended solids and large particles in the tap water Flow rate: 5m3/h Design pressure: 0.3Mpa Thickness: 2mm on body and 3mm on top Filter material: Fine quartz sand Filter material Size: 1-2.5mm and 2.5-4.5mm |
| 2---Active carbon filter |
Function:mainly remove organic substances, residual chlorine and odor in tap water Flow rate: 5m3/h Design pressure: 0.3Mpa Thickness: 2mm on body and 3mm on top Material: FRP Filter material: Fine active carbon Filter material Size: 20-40mesh |
| 3---Resin softening |
Function:mainly remove the calcium and magnesium in tap water, reduce the hardness of water Flow rate: 5m3/h Design pressure: 0.3Mpa Thickness: 2mm on body and 3mm on top Material: FRP Filter material: Resin 0.315-1.25mm |
| 4--Security filter: |
Function: Further filtration, to avoid quartz entry into RO to break the membrane Shell Material: SUS304 Cartridge material: Spray-fusing polypropylene 5um 20’ Cartridge Qty: 5pcs |
| 5---RO membrane: |
Function: the core part of pure water equipment, the production of high-purity water. Parameters: Model: ULP31-4040 Flow rate: ≥7.2m3/h(25°C) Desalination rate %:99.4% Max Inlet Water Temperature: 45 °C Max Working Pressure:600pai(4.14Mpa) Effective membrane area ft2(m2) :85(7.9) Operation: automatic control, automatic flush Membrane material: aromatic polyamide composite membrane Membrane housing material: SUS 304 |
| 6--- High-pressure pump: |
Function: provide enough pressure for reverse osmosis system Model:CVF2-13T 1.5kw Material: SUS304 Flow: 3.2m3/h Lift: 60m |
| 7---Anti-sludging agent dosing device |
| Function: According to a certain proportion of adding reverse osmosis antiscalant dosing, prevent reverse osmosis caused by dirt plugging in the long-running surface node membrane element, It can effectively disperse fouling. And prevent the deposition of iron and aluminum oxide |
Water Treatment Plant Ro System Details
