6000LPH Automatic Reverse Osmosis Plant Water Softener System For Remove Dissolved Solids From Water
RO Water Treatment System Description
Equipment summarize:
Reverse osmosis process uses semi permeable spiral wound membranes
to separate and remove dissolved solids, organic, pyrogens, sub
micron colloidal matter and bacteria from water.
Water permeates the minute pores of the membrane and is delivered
as purified water. Impurities in the water are concentrated in the
reject stream and flushed to drain.
Reverse osmosis is capable of removing 97-99% of total dissolved
solids (TDS), 99% of organic, including pyrogens, and 99% of all
bacteria in the feed water.
RO Water Treatment System Details
1. Capacity: 6000 L / H |
2. Rated power: 3.0 KW/H |
3. Voltage: 110V / 220V / 380V, 50Hz / 60Hz, single phase / 3phase |
4. Desalting rate:>=97% |
RO Water Treatment System Performance
⇒ Main part (membrane) of reverse osmosis system is imported from
USA.
⇒ Auto stop when no water and full water.
⇒ Auto controller, RO membrane auto flush to protect membrane.
⇒ Auto start when pure water tank have no water.
⇒ Low pressure protection switch to protect high pressure pump when
there is no raw water.
⇒ High efficient and low noise high pressure pump.
⇒ Product water conductivity meter to monitor product water quality
all the time.
⇒ Input water and output water pressure gauge to monitor RO
membrane *differential pressure to remind it's time for chemical
cleaning.
⇒ Inlet water solenoid valve to stop water when machine is stop.
RO Water Treatment System Consumables
There are several kinds of consumables you need to replace
regularly. (for 2000LPH)
a. Quartz sand: replaced about every 15 months. 50kg/bag,450kg/set
b. Activated carbon: replaced about every 15 months. 25kg/bag,
125kg/set
c. Resin: replaced about every 15 months. 25L/bag, 225L/set
d. PP Filter cartridge: replaced about every 1 month. 7pcs/set
e. Ro membrane: replaced about every 2 year. 8pcs/set
We suggest you buy 1- 2 years of PP filter cartridges together with
machine. Because these PP filter cartridges need to replace every
month.
RO Water Treatment System Processing
Process: raw water tank + raw water pump + quartz sand filter +
activated carbon filter + water softener/chemical dosing
system(optional) + security filter + high pressure pump + ro system
+ pure water tank + UV sterilizer(ozone generator) + precision
filter + water supply point
Some parts function:
1. Raw water pump: provide needed pressure for every
pre-treatment filter;
2. Quartz sand filter: use fiber glass as housing, fill quartz
sand, it can filter big particles impurities, suspended substances,
colloids etc. Important to remove iron and sediments you
mentioned;^^
3. Activated carbon filter: use fiber glass as housing, fill
activated carbon, remove color, odor, residual chlorine and
organics substances;
4. Security filter: prevent large particles, bacteria, viruses
into RO membrane, accuracy is 5µm;
5. High pressure pump: provide needed working pressure for RO
system, ensure production capacity of pure water;
6. RO system: can remove particles, colloids, organic
impurities, heavy metal ions, bacteria, virus, heat source etc.
harmful substances and 99% dissolved salts.
7. Ozone generator(for bottled drinking): can continue to kill
bacteria even water fill into bottled,viruses,cell damage,atc...
RO Water Treatment System Show
Thank you so much for your value time.Any questions please click
"contact now" send us inquiry !We will reply you within 24
hours.
