Guangzhou Kai Yuan Water Treatment Equipment Co., Ltd. |
|
10T/H Reverse Osmosis System/ Industrial Water Filter For Beverage
Reverse osmosis system is using city water as feed water.
Pre-treatment filters always contain quartz sand filter, activated
carbon filter, water softener and security filter. Main purpose is
to remove sludge, rust, colloid, suspended solids, color, odor,
biochemical organic impurity in raw water. And pre-filters can also
reduce water residual chlorine and pesticide and other harmful
pollutions. If raw water in high hardness, we will need to add
water softener to protect reverse osmosis membrane.
Description of RO unit
This system adopts mechanical and carbon filtration as pre-stage treatment. The device removes the sediments, organic substance, colloid, bacteria and other impurities in water. And the water can be pre-desalted by program control system. Most of the dissolved salt species material, bacteria and heat source can be removed by this method. Then use ozone preservation device to make sure that the water quality is up to the standard.
This system has both automatic and manual mode. The self-set
program control system can implement the automatic running mode by
regulating the transducer and pressure controller.
The basic working principle of reverse osmosis
1. Using a special high-pressure water pump, the raw water is added
to a pressure of 6-20 kg, so that the raw water permeates through
the reverse osmosis membrane with a pore diameter of only 0.0001 μm
under the action of pressure.
2, Chemical ions and bacteria, fungi, virions can not pass, with
the discharge of wastewater, only allow water molecules and
solvents less than 0.0001 microns to pass.
3. The security filter is equipped with a filter element with a
filter aperture of 5μm. These filters filter out any particles
larger than 5μm.
4. The more common type of permeable membrane is a polyamide
membrane, and the membrane type is a wound composite membrane. The
membrane has a salt removal rate of 99.5%.
5, Because the RO membrane is susceptible to the pH value, residual
chlorine and water temperature in the water, the RO membrane has
strict requirements on the water quality before the operation:
PH value: 3~10
Residual chlorine value: <0.1mg/L
SDI15 value: <5.0
Water temperature: <45 °C
INFRMATION OF THE MACHINE
Mode | KYRO-10TPH |
Power | Around 30.0KW |
Voltage | 380V/3ph/50Hz (customize available) |
Desalination rate | > 97% |
Recovery rate | 50%-75% |
Material | FRP, Stainless Steel , U-PVC |
Configurations | CNP pump&USA DOW membrane |
Certification | CE & ISO & SGS |
Some parts function
1.Raw water pump: provide needed pressure for every pre-treatment
filter;
2.Quartz sand filter: use fiber glass as housing, fill quartz sand,
it can filter big particles impurities, suspended substances,
colloids etc. Important to remove iron and sediments you
mentioned;^^
3.Activated carbon filter: use fiber glass as housing, fill
activated carbon, remove color, odor, residual chlorine and
organics substances;
4.Security filter: prevent large particles, bacteria, viruses into
RO membrane, accuracy is 5µm;
5.High pressure pump: provide needed working pressure for RO
system, ensure production capacity of pure water;
6.RO system: can remove particles, colloids, organic impurities,
heavy metal ions, bacteria, virus, heat source etc. harmful
substances and 99% dissolved salts.
Application
Electronic industry | Pre-filter for ultra pure water, chemical products and pure water |
Food & beverage industry | filter for mineral water, wines and fruit juice, bottled drinking water |
Medicine industry | filter for drug liquid |
Chemical industry | filter for organic solvent |
Petroleum industry | filter for oil-field flooding |
Technical Flowchart of Reverse Osmosis Plant
Untreated water feed pump →Quartz sand filtration→ Active carbon
filtration → Precise filtration → High pressure pump →RO Membrane
system→ CIP system → PLC system → Post Treatment (UV disinfection)
Thank you so much for your value time.Any questions please click
"contact now" send us inquiry !We will reply you within 24 hours.
Tel/whatsapp/wechat: +86-13660858152
Guidelines for getting a proper quotation
Tell us the raw water/source of water
Provide water analysis report
Required production capacity( 500 liters per hour, 1000liters per hour…)
What's the pure water used for( drinking, bottle water or industrial use…)