Industrial Reverse Osmosis Iron Removal Water System For Pure Water
Purifier
RO Water Treatment System Description
Reverse osmosis process uses semi permeable spiral wound membranes to separate and
remove dissolved solids,organic, pyrogens, sub micron colloidal
matter and bacteria from water. Feed water isdelivered under a
pressure of approximately 16 kg/cm2 through reverse osmosis
membranes. Waterpermeates the minute pores of the membrane and is
delivered as purified water. Impurities in the water are
concentrated in the reject stream and flushed to drain. Reverse
osmosis is capable of removing 90-99% of total dissolved solids
(TDS), 99% of organic, including pyrogens, and 99%bacterials in the
feed water.
RO Water Treatment System Details
Capacity | 3000lph | Water recovery | more than 50% |
Function | Producing Fresh Water | Type | Pure Water Treatment System |
Application | Filtration | Material | FRP+PVC/stainless teel |
Usage | Pure Water Process | Voltage | 110V / 220V / 380V |
Desalting rate | more than 97% | Membrane | USA Filmtec DOW |
RO Water Treatment System Performance
⇒ Main part (membrane) of reverse osmosis system is imported from
USA.
⇒ Auto stop when no water and full water.
⇒ Auto controller, RO membrane auto flush to protect membrane.
⇒ Auto start when pure water tank have no water.
⇒ Low pressure protection switch to protect high pressure pump when
there is no raw water.
⇒ High efficient and low noise high pressure pump.
⇒ Product water conductivity meter to monitor product water quality
all the time.
⇒ Input water and output water pressure gauge to monitor RO
membrane *differential pressure to remind it's time for chemical
cleaning.
⇒ Inlet water solenoid valve to stop water when machine is stop.
RO Water Treatment System Consumables
There are several kinds of consumables you need to replace
regularly.
a. Quartz sand: replaced about every 15 months. 50kg/bag.
b. Activated carbon: replaced about every 15 months.
25kg/bag,
c. Resin: replaced about every 15 months. 25L/bag,
d. PP Filter cartridge: replaced about every 1 month.
e. Ro membrane: replaced about every 2 year.
We suggest you buy 1- 2 years of PP filter cartridges together with
machine. Because these PP filter cartridges need to replace every
month.
RO Water Treatment System Processing
![](http://img.everychina.com/nimg/98/c0/e88b2fe267ae785c7c6ffaece2f3.jpg)
RO Water Treatment System Show
Thank you so much for your value time.Any questions please click "contact now" send us inquiry !We will reply you within 24 hours.
Tel/whatsapp/wechat: +86-13711203110
Guidelines for getting a proper quotation
Tell us the raw water/source of water
Provide water analysis report
Required production capacity( 500 liters per hour, 1000liters per hour…)
What's the pure water used for( drinking, bottle water or industrial use…)