Home Companies Guangdong Roten Environmental Protection Technology Co., Ltd.

Industrial PLC Combustion Furnace RL Series Carbon Steel Material

Guangdong Roten Environmental Protection Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Room303-1, Block 16, Zone 2, International Innovation Park, No.8 Ganggang Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province, China

Contact name:Bob Chen

Inquir Now

Guangdong Roten Environmental Protection Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Industrial PLC Combustion Furnace RL Series Carbon Steel Material

Country/Region china
City & Province foshan guangdong
InquireNow

Product Details

RSC-I pre-combustion furnace is suitable for mixing sludge and hazardous waste in cement kilns. Because hazardous waste and sludge have the characteristics of low calorific value, high water content, and small disposal volume, compared with RSC-II, this furnace body is narrower and has fewer steps, so it does not need to introduce tertiary air and raw materials, and its maximum production capacity can be achieved. Up to 10 tons/hour. RSC-Ⅱ pre-combustion furnace is suitable for blending and burning alternative fuels in cement kilns. Because alternative fuels have the characteristics of high calorific value, low water content, and large disposal capacity, compared with RSC-I, this furnace has a wider furnace body and more steps. It needs to introduce tertiary air and raw materials, and its maximum production capacity can reach 30 tons/hour.

 

Features

Strong airflow disturbance, different trajectories for light and heavy materials
The materials entering the furnace realize different movement trajectories in the airflow disturbance formed by the tertiary wind and air cannon. Light materials are suspended in the middle of the furnace body, preheated and dried, then enter the calciner with the tertiary air to continue burning. The heavy material rolls and burns to the next step under the action of the air cannon, and the ash enters the calciner.

 

Integrated design, high heat utilization efficiency
The furnace body is integrated with the calciner, and the heat generated by the material is directly transferred to the calciner for use. Introduce hot raw meal, use the heat absorption principle of hot raw meal in the pre-combustion furnace to directly absorb the heat generated by the material and play a role in controlling the furnace temperature.

 

Multifunctional combustion platform, accepting a variety of materials
The decomposing combustion platform is a multi-layer composite structure, which can prevent the cracking of refractory materials caused by contact with high water-content materials such as sludge. The hydraulic pusher at the end of the platform can remove the coking produced by straw or high-organic materials in time.

Hot Products

RPA10-D Single Plunger Solid Pump with Wear-Resistant Hard Alloy RPA series single-plunger solid ...
250mm Single Solid Waste Pump for Industrial Applications *, *::before, *::after {box-sizing: border...
Waste Lithium Battery Recycling System for Resource Recovery Taking into account the characteristics ...
The SMP (Shredding-Mixing-Pumping) system includes three main units and two auxiliary units. The ...
RSC-I pre-combustion furnace is suitable for mixing sludge and hazardous waste in cement kilns. ...
Coal slime resource utilization system The coal slime recycling system of Roten Environmental ...