construction industrial 250 T/H Welding Jaw Stone Crusher

PE Small Jaw Crusher Stone Crusher Machine

Brief introduction of jaw crusher machine

Jaw crusher is widely used in construction, mining, chemical industries and other industries which need a powerful machine to crush rocks and stones. Generally, jaw crusher can be used for both primary and secondary crushing. It can be used to crush the hardest rock and the materials with particle size around 125~1020mm and compressive strength less than 320MPa.

Features of jaw crusher machine

• Deep crushing cavity without dead zone, improve the feeding capacity and output.

• The gaskets adjusting device of discharging opening, reliable and. convenient, with large adjusting range, increases the flexibility of the equipment.

• The crusher can be put into production after normal operation.

• The materials to be crushed should be evenly added into the crusher cavity. Side feeding or full stacking should be avoided to avoid unilateral overload or overload.

• Before stopping, stop feeding, and turn off the power after the materials in the crushing cavity are completely discharged.

• During crushing, if the machine stops due to the blockage of materials in the crushing chamber, the power supply should be turned off immediately to stop the operation, and the materials in the crushing chamber can be cleaned up before starting again.

Technical Parameter of jaw crusher

Working principle of jaw crusher machine

Motor drives belt and belt pulley, makes moving jaw up and down through eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate. During this process, the material is crushed and ground, thus the crushing will be done. When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room.

About Us

Henan Zhongke Engineering & Technology Co., Ltd. is an import and export company, which is specialized in mining machinery, metallurgical machinery and building materials equipment manufacturing. The head quarter located in Zhengzhou High-Tech zone.The company business scope include: jaw crusher, impact crusher, hammer crusher, cone crusher, ball mill, rod mill, ceramic ball mill, vibrating feeder, vibrating screen, belt conveyor, mineral ore separating machine, magnetic separator, flotation machine, classifier, spiral chute, rotary dryer, rotary kiln. We also can offer sand and stone production line, crushing and grinding plant, ore beneficiation line, A A C (aerated concrete block) production plant, small cement plant, active lime production line and so on.

We pay attention to basic management, build enterprises quality management system; the work site realizes fixation management; the logistic enjoys ABC management; the office achieves computer automatization; the product development process design adopts C A D, C A P P technology. Zhongke Machinery can provide high quality products, as well as customized optimized technical proposal and one station after-sale service.

The company machine quality and service help us gain reputation in the mining machines market. So far we have exported to Canada, Ecuador, Indonesia, Nepal, India, Russia, Uzbekistan, Honduras, Zimbabwe, Nigeria, Malawi, and the business keeps expanding.

Welcome to Henan Zhongke factory!