Active Member
|
[China]
Address: No.2,Changhong Road, Modern Agriculture Demonstration Park, Zhangjiagang City, China
Contact name:Tang
Jiangsu Acemien Machinery Co., Ltd. |
|
|
Corrugated Trapezoidal UPVC/PVC Wave Roofing Tile Making Machine
Fast View on Trapezoidal Plastic Roofing Sheet from Recycled PVC Material
1,Will not cause any pollution to the environment, and is recyclable.
2,Surface color last fresh for almost 25 years.
3,Cheaper than the traditional tiles such as ceramic, clay or metal ones, economic for civil application.
4,Nice appearance similar to shape of bamboo, and gives a sense of
ancient style.
5,Lightweight,easy for transportation and installation.
6,Raw material PVC and Calcium Carbonate are available almost in
any country,
PVC drainage pipe, conduit PVC pipe and PVC profile feed as recycled layer.
7,Heat resistant due to low conductivity of plastic material used.
8,Fire retardent, not combustible when fire source stops, safe
for use.
Imitation trapezoidal plastic PVC roof tile making line
Acemien Machinery created the unique plastic roofing tile
production machine, now we invent the most reliable co-extrusion
and distributed control technology to produce durable and high
quality plastic roof tile sheet, which featrues in weather
resistant with many surface printing.
1,Raw Material Mixing(PVC resin, Calcium Carbonate and other
additive)
Using our reliable high efficiency hot and cool group mixer
equipment, the raw materials mentioned above, and other important
additives such as Cloride PE, pre-wax, Stearic Acid, Compound
Stabilizer, ACR, Paraffin are precisely dosed and then completely
mixed, which is a very important part in making roof sheet of good
quality, because the improper mixing would lead to change of
performance of roof sheet, and it will cause problem like
crack, unflat and bump for PVC roof tile after produced.
2,Co-extrusion.
In this stage,if we are to produce 2 layers roof tile, we can place
a single extruder SJ50 and another conical twin screw SJZ80
together for coextrusion, but actually 3 layers roof tile is
common in production,in that case we will place one more extruder
SJZ65. Through a series of function inside the screw, the
mixed raw material is feeded,molten and compressed inside
the conical twin extruder and single extruder, then the molten ASA
material meets the molten PVC fluid in the distributor, but these 2
streams of fluid will not be mixed together due to the special
design of plastic distributor block, where the ASA moves towards
the upper layer and the PVC mixture moves towards the lower layer,
and finally these 2 streams of fluids continue to move forward to
the T-die by the extreme pressure caused by extruder machine to
form a fixed sheet with certain width and cross-section shape.
Important tips:
You have to adjust the speed for ASA single extruder to ensure that
the surface ASA layer is the same width as the PVC layer,
otherwise, the surface ASA layer will go under the PVC layer, or it
will not fully cover the PVC layer, in a word, the 2 layers must be
of the same width. But remember that the PVC extruder speed
determine the production capacity.
Equipment List
| No. | Main machine | Qty. | remark |
| 1 | Screw loader for extruder 500kg/hr | 1set | Main tile extrusion line Ridge tile forming |
| 2 | Conical twin-screw extruder(for bulk material) | 1set | |
| 3 | Automatic vacuum loader with drying hopper | 1set | |
| 4 | Single screw extruder(for ASA) SJ50/30 250kg/hr | 1set | |
| 5 | T-die mould and distributor | 1set | |
| 6 | Forming machine with trimming device | 1set | |
| 7 | Embossing unit(2 rolls, vertical) | 1set | |
| 8 | Automatic Cutter(PLC control, 5 sets of length) | 1set | |
| 9 | Stacker 6 meters | 1set | |
| 10 | Ridge tile oven(for heating formed cold main ridge tile) | 1set | |
| 11 | Ridge tile forming machine and mould(for other ridge tile) | 1set | |
| No. | Auxiliary machine | Qty. | remark |
| 12 | Screw loader for mixer unit | 1set | Auxiliary equipment |
| 13 | Mixer unit(PVC hot and cooling mixing) | 1set | |
| 14 | Crusher(for crushing waste PVC sheet into scrap) | 1set | |
| 15 | Pulverizer(for milling pvc scrap into powder) | 1set | |
| Other detail | |||
| Motor: Siemens / WEG Inverter: ABB / Holip Contactor: Schneider Air Switch: LS / Delixi Temperature controller: Omron Stainless steel:SS304 Bearing: NSK | |||
FAQ
Q1:What's your warranty policy?
A1:We will guarantee the machine for 12 months since the date of
shipment(which means the date since shipment leaving from Seller's
factory) or the Seller will guarantee the machine for 12 months
since the date of starting installation and adjustment, whichever
comes first.
Q2:What is your overseas service?
A2:We will provide high quality overseas service ,our technical
staff will be able to provide you with technical support ,for you
personally to overseas assembly and test equipment.
Q3:What's your minimum order quantity?
A3: Minimum order quantity:1 set
Q4:What package do you use for the product?
A4: Wrapped with plastic film, then packed in wooden box, and L/S/D
for seaworthy.
Q5:Do you have technical instruction if I buy your product?
A5:Please read the user manual carefully for your reference, we
have detail instruction on it. If your problems still can not be
solved, welcome to contact us for help.
Aftersales Policy
1 Technical documents
All the symbols on the equipments should be in English. Seller is
responsible to provide general layout plan, electric plan,
installation direction, and manual book in English to Buyer on
time.
2. Quantity and quality guarantee
a. Quantity/Quality Discrepancy to destination port during
transportation:
In case of quality/quantity discrepancy to destination port in
transportation, customer should file claim within 30 days after the
arrival of the goods at port of destination. Insurance company and
shipping company will be responsible for any discrepancy of the
goods caused by shipping company and other transportation
organization and/or post office.
