Servo Motor Reinforcing Diamond Mesh Wire Making Machine
1. Product description
Servo motor reinforcing diamond mesh wire making machine is
used for making wire mesh. The welded mesh panel welding
equipment can weld wire diameter from 4mm to 9mm. The welding range
is very big. The drawing mode: servo motor reciprocating
drawing, pneumatic tightening cross wire, to ensure the precise
position of the drawing mesh.
2. Technical parameter
Model | HY-DHW-1500 | HY-DHW-2000 | HY-DHW-2500 | HY-DHW-2800 | HY-DHW-3300 |
Weld width(mm) | 1500 | 2000 | 2500 | 2800 | 3300 |
Meshi trip(mm) | Single trip 3000 and no limit on return |
Std trans.spacing | >=25mm-stepless adjustable |
Std long.spacing | >=50mm, and progressive increase by 50 | >=100mm, and increase by 100 |
Std weld spots | 31 | 41 | 51 | 27 | 32 |
Wire diameter(mm) | 3.0-6.0 | 3.0-6.0 | 3.0-6.0 | 5.0-12.0 | 5.0-12.0 |
Weld speed(times/min | 50-70 | 40-60 | 40-60 | 40-60 | 40-60 |
Trans material | Straight bar/rod | Straight bar |
Long material | Straight bar/rod |
Control mode | PLC programming servo motor stepper |
Mesh diagonal error | <=2 |
Mesh overall error | <=2 |
Air pressure | >=0.7 |
Weld material | Cold drawn wire, galvanized wire, cold rolled ribbed steel |
3. Application area
The servo motor reinforcing diamond mesh wire making
machine can be used in in construction, hollow wall
reinforcement, increased elasticity, prevent cracks in the wall, it
is a good building materials. Is used for the foundation, wall,
etc. have a place of strength and stability as well as local high
local stress requirements at each of the key used in the
reinforcement of brick and block construction of cement mortar, so
that brick-and-mortar form an integral whole structure, the maximum
stress and shock absorption, excellent shock cracking, good
building materials.
4. Advantages
a. User-friendly English manual for welded wire mesh machine
using and maintaining.
b. We can design the welded wire mesh machine as your
requirement.
c. The greatest advantage is possible to adjust the distance
of line wires at random on the same mesh panel.
d. The welding wire diameter is able to be made to orders. The
range of our mesh welding machine is from 0.3mm to 12mm. Material
can be stainless steel wire, galvanized wire, plain steel bar, cold
rolled rebar, hot rolled rebar.
e. The machine line automatic degree can be according to
request. For the economical type, line wire and cross wire are pre
straightened and cut to length. We are capable to produce
fully automatic machine.