H Beam Milling Machine is used mainly for end face milling of huge
jobs. This is essentially a portable machine.
H Beam Milling Machine is a portable milling solution for huge
jobs. This machine can be used to end face mill, drill and bore.
Working:
This machine can be moved within the workshop with the help of a
crane with the help of a crane. The machine then can be bolted to
get rigidity and the machining can be started, while the job rests
on floor with or without clamping depending on its size.
Description:
The machine is provided with all three axes movement, X,Y and Z.
The axes movement is given by lead screw box nut and the guide ways
will be of cast iron or combination of case hardened guideways and
turcite. The axes movement is driven by a Ac indiction motors and
worm reduction gear boxes. A common vector VFD is used for stepless
feed range of all the three axes.
The milling head can be a 5HP milling head with ISO 40 spindle
output or a 10 HP milling head with a ISO 50 spindle output.
Attachments Available:
Right Angle Attachment: A right angle attachment can be provided at
additional cost. This can used to machine at right angles to the
horizontal axis. The swiveling base of the attchment allows the
right angle head to swivel 360 °.
Universal Milling Attachment: Spherical contouring capability tot
(a) to tilt±360° around the machine spindle axis (b) to tilt ±360°
on its own spindle axis& & (c) to oscillate from front to
back. In other words, the spindle of the universal head can be
positioned at any desired angle – at circular planes or at
oscillating plane or at a combination plane of both circular and
oscillating positions.
Alternative Milling Head:
Ram Type Milling Head: A Ram type milling head, as the name suggest
has a ram instead of the quill for horzontal movement . The ram
adds extended reach to the horizontal axis, improves rigidity.
The ram type milling head with right angle attachment or universal
milling atttachment is ideal for machining the inner walls of the H
beam.
