Excavator Bearings Excavator-specific angular ball bearings are used in excavator machinery appliexcavatorions. This kind of angular contact ball bearing has a large contact angle (40 degrees), so it can bear a large axial load, and can also bear axial and radial related loads. In addition, it can carry a heavier load capacity than a bearing of the same size because it has more balls in it. It is widely used in all imported exavators. High precision, low noise, long life and this bearing kink are widely used in excavators. Mainly used for KOBELCO excavators, Komatsu excavators, excavator excavators, Kato excavators, Hitachi excavators, Daewoo excavators, Hyundai excavators, Volvo excavators, etc. Appliexcavatorions Excavator-specific angular ball bearings are used in excavator machinery appliexcavatorions. This kind of angular contact ball bearing has a large contact angle (40 degrees), so it can bear a large axial load, and can also bear axial and radial related loads. In addition, it can carry a heavier load capacity than a bearing of the same size because it has more balls in it. It is widely used in all imported exavators.
production size
If there are any other items you want. Please check the list below
| bearing | size | bearing | size |
| 180BA-2256S | 180mm * 225mm * 21.5mm | BA300-5WSA | 300*380*40 |
| 184BA-2251 | 184mm * 226mm * 21.5mm | BA340-1 | |
| 200BA27V-2 | 200*272*33 | BA345-1SA | 345mm * 470mm * 42/53mm |
| 210BA27V-2 | 210*295*35 | BA4531 | 225*315*40 |
| 230BA30-2 | 230*300*33 | BD130-1 | 130*166*34 |
| 240BA32S1 | 240*320*38 | BD130-16A | 130*166*40 |
| 245BA35 | 245*355*45 | BD130-2 | 130*166*34 |
| 260BA-35S2 | 260*355*40 | BD135-6 | 135*166*41 |
| 180BN19-BTB7936 | 180*258*33 | BD140-1 | 140*180*34 |
| 310BN42-2 | 310*420*45 | BD155-6 | 155*198*48 |
| 340-1 | | BD165-6A(3321) | 165*210*58 |
| 4T-735449V1 | 178*216*21 | BD185-6A | 185*232*51 |
| AC423040-1 | 210*300*40 | BN220-1 | 220*280*28 |
| AC4629 | 230*290*27 | BN230-3A | 230*300*33 35 |
| AC4631 | 230*310*39 | BN230-7 | |
| AC4632 | 230*320*40 | CR2256 | 110mm * 150mm * 20.5mm |
| AC463240 | 230*320*40 | CR-4411PX2U6 | 220*290*33 32' |
| AC4831PX1 | 240*310*33 | CR6016PX1 | 300*390*45 38 |
| AC5033 | 250*330*37 | HS05154 | 126*154*14 |
| AC523438-1 | 260*340*38 | HS05383 | 320*383*30 |
| AC5836 | 289*355*34 | JM738249/10 | 192*260*46 |
| AC6015 | 300*372*36 | L540049/10 | 197*254*28 |
| AC6037-1S | 300*370*33 | L853049/10 | 276.225 x 352.425 x 36.512 |
| BA120-16A | 120*165*22 | LL225749/10 | 127mm*165.985mm*18.3mm |
| BA135-6 | 135*170*20 | LL639249/10 | 196.85mm * 241.3mm * 23.8mm |
| BA160-432348 | 160*210*24 | LL641149/10 | 202*261*30 |
| BA180-4BWSA | 180mm * 250mm * 19/33mm | LM739749/10 | 197*257*40 |
| BA200-10 | 200*280*38 | M348449/10 | 248*347*66 |
| BA200-6A | 200*250*24 | MC6034 | 300*340*18 |
| BA205-1 | 205*295*40 | R196Z-4SA | 196.85mm * 241.3mm * 23.8mm |
| BA220-6SA | 220mm*276mm*22/27mm | SF2812VPX1 | 140mm * 175mm * 17.5mm |
| BA222-1WSA | 222*273*26 | SF3227PX1 | 160*200*20 |
| BA222-5WSA | 222*273*26 | SF3235(3227) | 160*200*21 |
| BA230-2 | 230*320*40 | SF3607TVPX1 | 180mm * 225mm * 21.5mm |
| BA230-7ASA | 230*300*35 | SF4007PX1(BA200-7) | 200*250*24 |
| BA240-3AR | 240*310*33 | SF4019PX1 | 200*260*30 |
| BA240-5AR | 240*310*32 | SF4411 | 220*290*32 32.5 |
| BA246-1SA | 246*308*33 | SF4444PX1 | 220*295*32 33 |
| BA246-2SA | 246*313*32 | SF4454PX1 | 220*295*33 |
| BA250-4A(HT1529) | 250*330*38 | SF4615PX1 | 230*300*35 |
| BA260-3A | 260*340*30 | SF4630PX1 | 230*300*35 |
| BA260-4A | 260*340*38 | SF4815VPX1 | 240*310*33 |
| BA270-3SA | 270*350*40 | SF4826PX1 | 240*310*33 |
| BA280-2SA | 280*370*40 | SF4831PX1 | 240*310*33 |
| BA289-1A | 289*355*33 | SF4852PX1 | 240*310*33 |
| BA290-3A | 290*380*40 | SF4860PX1 | 240*320*37 |
| BA300-1WSA | 300*390*40 | SF5235VPS1(816414) | 260*330*35 |
| BA300-4WSA | 300*395*50 | SF6015PX1 | 300*372*36 |
main products
Product packaging
Packing: 1. Industrial packing 2. Single box + carton + pallet/box 3. According to customer demand Delivery time: 1. Generally after payment: within 3 days. 2. If production is needed, about 30 days payment less USD 100, T/T in advance. 1. More than USD1000, 30% T/T in advance, 70% T/T before shipment
By sea: by sea/air/express, such as EMS FEDEX TNT DHL.
