Motorcycle Spare Parts Spherical Roller Bearing 24060 For
Wholesales Used Best Rolled Steel
Spherical roller bearings are equipped with drum roller bearings
between two raceway inner rings and raceway outer rings. The
curvature center of the raceway surface of the outer ring is the
same as that of the bearing center, so it has the same alignment
function as the automatic aligning ball bearing. When the shaft and
shell are flexed, the load can be automatically adjusted and the
axial loads in two directions. Radial load capacity is large,
suitable for heavy load and impact load. The inner diameter of the
inner ring is a cone hole bearing, which can be directly installed.
Or use tight sleeve and dismantling cylinder to install on the
cylinder shaft. The cage uses a steel stamping cage, a polyamide
forming cage and a copper alloy car cage.
For self aligning bearings, when the axle bearing is loaded into
the axle hole of the box, the middle mounting ring can prevent the
outer ring from tilting and rotating. It should be kept in mind
that some sizes of self aligning ball bearings are out of the side
of the bearing, so the middle mounting ring should be concave to
prevent damage to the ball. A large number of bearings are usually
installed by mechanical or hydraulic pressing method.
For detachable bearings, the inner ring and outer ring can be
installed separately, which simplifies the installation process,
especially when both inner and outer rings need interference fit.
When loading the shaft of the inner ring into the bearing box
containing the outer ring, it is necessary to see if the inner and
outer ring is correct in order to avoid scratching the bearing
raceway and rolling parts. If cylindrical and needle bearing
bearings are not lined with flange or inner side with flange, the
installation sleeve should be recommended. The outer diameter of
the sleeve should be equal to F of the inner race raceway, and the
tolerance standard for machining should be D10. The needle roller
bearing for stamping outer ring is preferably installed with
mandrel.