Henan Harvest Machinery & Truck Co., Ltd |
Verified Suppliers
|
|
XCMG XE500EM Steel Grabbing Machine Grabber Crawler Excavator Bucket 1m3 Power 200KW
More energy saving and environmental protection
* Adopt domestic high-quality motor, the motor efficiency is up to
96%, meet IE3 (ultra high efficiency) standard, and achieve high
efficiency and energy saving
* The hydraulic oil radiator fan and air conditioning compressor
drive power source are imported fine motors, which meet the IE2
standard. Only run when needed, more energy saving.
More efficient returns
* Compared with other transmission systems, the electric
transmission system has higher efficiency and smaller heat loss,
which can effectively improve work efficiency.
* The use of large-section straight-moving arms, gooseneck-type
curved sticks, and swing-type front-end working tools improves the
material handling range.
* Equipped with double-stick cylinder, it can effectively increase
the working load.
Smarter control
Adopt electromechanical-intelligent intelligent control system, design special display, monitor the operating condition of the whole machine and alarm in time when the machine fails and needs maintenance. Each electrical circuit has a protection device, which can realize self-protection in emergency.
Product Paramenters
Model | UOM | Parameters |
Operating weight | Kg | 49000 |
Bucket capacity | m' | 1 |
The number of poles | / | 4 |
Voltage/ frequency | / | AC 380V/50Hz |
Motor output power | kw/rpm | 200/1488 |
Max. torque/ speed | N.m/rpm | 1283/1488 |
Walking speed | km/h | 2.5 |
Rotary speed | r/min | 7.8 |
Climbing ability | ° | 35 |
Ground pressure | kPa | 87 |
Max. traction force | kN | 338 |
Main safety valve pressure | MPa | 31.4/34.3 |
Walking system pressure | MPa | 34.3 |
Rotary system pressure | MPa | 28.4 |
Pilot system pressure | MPa | 3.9 |
Hydraulic tank volume | L | 430 |
Total length | mm | 10965 |
Total width | mm | 4210 |
Total height | mm | 7950 |
Table width | mm | 3075 |
Track length | mm | 5353 |
Chassis total width | mm | 3722 |
Track width | mm | 600 |
Track wheelbase | mm | 4292 |
Gauge | mm | 2890 |
Counterweight clearance | mm | 1324 |
Min. ground clearance | mm | 555 |
Min. turning radius | mm | 3705 |
Crawler height | mm | 1198 |
Max. crawle height | mm | 13000 |
Max. discharge height | mm | 12585 |
Max. depth | mm | 6500 |
Max. capture radius | mm | 15110 |
Min. turning radius | mm | 4000 |
Arm length | mm | 8600 |
Bucket rod length | mm | 6000 |
Product Show