|
[China]
Trade Verify
Address: 4th Floor Block 1, COFCO(FUAN) Robotics Industrial Park , Da Yang Road No. 90, Fuyong Distict, Shenzhen City, China
Contact name:Alice Du
Shenzhen Rion Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
MEMS Electronic Tilt Inclinometer Meter For Underground Drilling Rig
HCA518T/HCA528T-N is a high accuracy single /dual axis inclinometer, output adopt the standard industry electronic interface 4 ~ 20mA, can be long-distance transmission of up to 2000 meters. The product uses the latest MEMS high technology for production, made precise compensation and correction to temperature error and nonlinearity error, small measuring range and the highest accurate up to 0.003 ° (bigger measuring range index, please refer to product technical data),
HCA518T&HCA528T inclinometer use the dynamic zero test compensation technology to ensure product Quick Launch, high resolution ,stable data, good capacity to bear shock & vibration, built-in anti-RF, adopts anti-electromagnetic interference circuit to ensure that the output signal to a higher anti-interference ,in addition to this product is better than the similar market product on software technical data, on the reliability and stability the product is also using the high-end application-level MCU,three-proofing PCB board, imported cable, wide temperature shielded metal enclosure and other measures to improve product industrial level,to ensure the product can be long-term & safety extraordinary operation in harsh environments.
▶ FEATURES
★ Single / dual axis inclination measurement ★ Range ±1～±60 ° optional
★ Accuracy: Refer to technical data ★ Wide voltage input 11.5～36V
★ Output mode 4~20mA ★ Wide temperature operation -40～+ 85 ℃
★ IP67 protection ★ High vibration resistance> 2000g
★ High resolution 0.001 ° ★ Small size L90mm × W59mm × H34mm (customizable)
▶ APPLICATION
★ Equipment vehicle leveling ★ Bridge and Dam monitoring
★ High-altitude platform safety protection ★ Angle control of medical equipment
★ Attitude navigation of underground drilling rig ★ Leveling of railway gauge and gauge
★ Direction measurement based on tilt angle ★ Tilt monitoring of geological equipment
★ Mining machinery, oil drilling equipment ★ Equipment level control
★Alignment control , curve control
★ Pitch angle measurement of directional satellite communication antenna
▶ TECHNICAL DATA
| HCA518T/HCA528T-N | CONDITION | PARAMETERS | UNIT | ||||
| Measure range | ±10 | ±30 | ±60 | ±90 | ° | ||
| Measure axis | X/XY | X/XY | X/XY | X/XY | axis | ||
| Zero output | 0° output | 12 | 12 | 12 | 12 | mA | |
| Resolution | 0.001 | 0.001 | 0.001 | 0.001 | ° | ||
| Measure accuracy | MAXE | Room temp. | 0.005 | 0.01 | 0.02 | 0.03 | ° |
| RMSE | Room temp. | 0.003 | 0.003 | 0.005 | 0.008 | ° | |
| Zero Temp. coefficient | -40～85℃ | 0.0005 | 0.0005 | 0.0005 | 0.0005 | °/℃ | |
| Sensitivity temp. coefficient | -40～85℃ | ≤100 | ≤100 | ≤100 | ≤100 | ppm/℃ | |
| Power on time | 0.5 | 0.5 | 0.5 | 0.5 | S | ||
| Sensitivity temp. coefficient | 20Hz | ||||||
| EMC | According to EN61000 and GBT17626 | ||||||
| MTBF | ≥50000 hours/times | ||||||
| Insulation Resistance | ≥100MΩ | ||||||
| Shockproof | 100g@11ms,3 Axial Direction (Half Sinusoid) | ||||||
| Anti-vibration | 10grms,10～1000Hz | ||||||
| Protection glass | IP67 | ||||||
| Cables | Standard configuration: 2m length, wear-resistant, wide temperature, shielded cable 7P * 6.8mm aviation connector, cable weight ≤110g | ||||||
| Weight | ≤250g(Excluding cable) | ||||||
HCA518T HCA528T-N HIGH PRECISION CURRENTY TYPE INC...
