Please Note:
1. Not compatible with SATA MINI PCI-E SSD/PATA MINI PCI-E
SSD and RAID MINI PCI-E SSD..
2. The SSD work will release heat,the shell fells very
hot,this is normal.
3. Please don't try to use USB extension cable,and don't
connect the product on front USB ports of the desktop,because it
will lead to can't meet the demand of the normal working current of
the SSD!
4. Please enter the disk manager to hard disk partition and
format the hard disk If you open "my computer" can't see the
increase of disk partitions.
• USB 3.0 to mSATA SSD 5x3cm mSATA to USB3.0 Converter Adapter NO
need USB cable
The MINI HDMI to SDI Converter allows HDMI signals to be
shown on SDI display while ensuring high bit rates of 2.970 Gbit/s
to give you high resolution signal without any loss. For
professionals this means that it is now easier to convert your high
def HDMI signal with audio to SDI for long distance transmission
and display your work on SDI display.
• Feature:
100% brand new and high quality
Supports 3*5cm mSATA SSD to USB 3.0 interface.
High end quality product with sleek case design .
USB 3.0 interface. Plug and Play.
Compatible with Windows 2000/xp/Vista/7/8/mac os 7.0 and
above.
Demension: 7.8 cm*3.3 cm*0.7 cm.
Instruction Notice:
1. This product performance is being improved unceasingly,
like has the change, not separate informs even slightly.Pictures
for reference only, subject to our available products.
2. Not compatible with SATA MINI PCI-E SSD/PATA MINI PCI-E
SSD and RAID MINI PCI-E SSD.
3. Please note that the query rated current of SSD,compute
maximum power supply current is 1A of USB 3.0 interface,if the USB
port can't provide enough current to the ssd,the computer can't
identify or work can't well because the power supply can't meet
requirements;if such issues are within your computer USB 3.0
interface,please try to access USB 2.0 interface test it,because it
can reduce the speed to reduce power consumption.
4. The SSD work will release heat,the shell fells very
hot,this is normal.
5. Please try not to use USB extension cable,don't connect
the product on front USB ports of the desktop,because it will lead
to can't meet the demand of the normal working current of the SSD.
6. Please cancel the hard disk password if your hard drive
set a password in the original computer, The other computer doesn't
recognize the hard disk if the password not cancel.
7. Please enter the disk manager to hard disk partition and
format the hard disk If you open "my computer" can't see the
increase of disk partitions.
USB port can't meet the SSD rated current of the fault phenomenon:
A: Unable to identify the SSD, but adapter card not to
install SSD connected computers,the computer can identify new
hardware.
B: Adapter card to connect the computer after constantly
connected and disconnected.
C: Products to connect the computer, can read data of hard
disk drive, but can't write data to the hard disk or format the
hard disk partition, as long as write data will disconnect or a
computer without any response (Hard disk has bad sectors will have
this phenomenon, please pay attention to distinguish).
About Mini PCIe SSD interface standard:
1.Mini PCIe interface defined there are six,A: mSATA Solid
State Drive,using SATA protocol;B: SATA MINI PCIE Solid State
Drive,its nature is SATA interface,but the pin definition is
different compared with mSATA solid State Drive; C: PATA MINI PCIE
Solid State Drive, its nature is IDE interface;D: Raid mSATA;E:3G
or WIFI module;F:Inter Turbo Memory.Six types of interface
definition looks exactly the same,so please be sure to distinguish
your solid state drive's interface definition.
2.Mini PCIE interface solid hard except has interface
definition of the difference, also has length of distinction: A:
half high, length 2.7 cm; B: full high, length 5 cm; C: length 7
cm, it is only 3 cm * 5 cm size!