WELLMARK PACKAGING CO.,LTD. |
Verified Suppliers
|
|
Desktop Box Gluing Machine
How to use
1.1 Installation:
The machine must be placed on the level of the face, not a serious
tilt phenomenon, otherwise, will make the glue to the end of the
accumulation of glue out of the water tray
1.2 test machine:
(200V / 50Hz) Turn on the power switch (the switch and the motor
knob are in the same way) when the handle is turned manually
(clockwise) A motor board, the motor speed control knob, the
machine began to slow to fast rotation.
1.3 Adjustment:
A. The thickness of the adhesive layer adjustment: at the same time
rotating rubber layer thickness adjustment handle (the handle left
and right each one), so that with a rubber roller before and after
the move, and the gap between the roll changes,
Satisfied thickness of the adhesive layer. Then, tighten the screw
on the screw can be. Adhesive thickness adjustment range of 0.03 ~
0.10MM.
B. Adjustment of the platen roller: Loosen the star handle on the
handle (the left and right) of the platen roller to rotate the nut
under it, and move the platen roller up and down. Which brought out
the paper gap, pay attention: This gap should be at least greater
than the above mentioned thickness of the adhesive layer. Otherwise
it will make the paper roll with glue.
1.4. Disassembly of plastic disk:
The plastic frame structure for the parallelogram mechanism, simply
press the counterclockwise direction gently pull the tray handle to
the next limit can be removed, remove the plastic plate, let go,
the frame will automatically reset, heavy Repeat the above
procedures, can be installed on the plastic.
Technical Parameter
Model | WM-720D |
Width of paper | W60-700mm |
Paper Thickness | 80-1000gsm |
Working Speed | 10-30pcs/min |
Power | 1kw |
Voltage | 220V/50Hz |
Weight | 50kg |
Machine Size | 1100*500*380mm |
Packing and Shipping
Packaging by wooden case and shipping by containers.
Our Services
1. Pre-Sales Service:
Inquiry and consulting support.
Sample testing support.
View our Factory.
2. After-Sales Service
Training how to install the machine, training how to use the
machine.
Engineers available to service machinery overseas.
3. Warranty
We provide 12 months warranty. During warranty, we provide free technical support and free normal spare parts for replacing, except for man-made damage. We can go to your country to debug machine when you have questions can not resolve, but you must pay 100usd/day to our engineer.
Look forward to long term cooperation with customers, we will make best service and after sales service for all of our customers.