Active Member
|
[China]
Address: Wulong industrial park.,Zhengzhou,Xingyang City,China
Contact name:Maxwell
Henan Fair Machinery And Equipment Co. LTD |
|
|
Wall Putty Dry Mortar 4t/H Tile Adhesive Mixer Dry Mortar Production Line
As the top manufacturer and supplier of the wall putty making machine, Fier Machinery can supply you with the best Berger wall putty machine price. Equipped with screw hoister, finished product warehouse, and automatic quantitative packing machine, the automatic measuring and packing of putty powder is realized, It saves the packing cost and manpower for you.
Product Advantages of Fier Wall putty making line
1. Fier automatic putty making machine, using horizontal barrel
structure, smooth operation, low noise, easy installation, so that
Use a wide range.
2. Adopt inner and outer three layers of screw belt to mix, no dead
Angle of lumps, fast mixing speed, and high uniformity.
3. Equipped with spiral lifting equipment, the feeding port is
flush with the ground and the discharging speed is fast.
4. There is a window at the bottom of the body to clean the
leftover material.
5, Fier putty making machine, the output of a variety of
specifications to meet the needs of customers
6..Flexible splice mode, valve pocket and open pocket can be used;
7. Small investment, quick results, suitable for individuals or
small processing plants
8. Small area, less than 3 meters in height, ordinary houses can be
built.
9. Simple operation, 1-2 people can operate.
10. High output, 30-50 tons per day.
Model&Specification of FAIR dry mixing mortar plant production line
Model | Out put | Occupied area | Equipment height | Manpower | Batching and packaging |
Simple type | 3-4t/h | 20m2 | 3-4m | 2-3 Person | Manual batching Automatic packaging |
Semi-automatic type | 5-8t/h | 50-60m2 | 6-8m | 3-4 Person | Manual batching Automatic packaging |
Full automatic type | 8-30t/h | 60-100m2 | 8-13m | 3-4 Person | Automatic batching Automatic packaging
|
How to manufacture tile adhesive By Fier tile adhesive manufacturing plant.
Ceramic tile adhesive, also known as cement-based adhesive for tile
walls and floor tiles,
The tile adhesive manufacturing process is a powder mixture
composed of hydraulic cementitious material (cement), mineral
collector (quartz sand), and organic additive (rubber powder,
etc.), which shall be stirred with water or other liquid in a
certain proportion when used.
These are also tile adhesive ingredients. Usually the tile adhesive
raw material very accessible.
Mainly used for bonding ceramic tile, face tile, floor tile, and
other decorative materials, widely used in interior and exterior
walls, floors, bathrooms, and other rough architectural decoration
places.
Its main characteristics are high bonding strength, water
resistance, freeze-thaw resistance, aging resistance and convenient
construction
According to the actual situation, cement-based tile glue is
divided into three categories: C1: bond strength is applicable to
small bricks
Bond strength than C1, C2 type: apply more large brick (80 * 80)
(quality brick, such as marble you need to use solid glue) C3 type:
bond strength and C1 close, applicable to small brick, jointing can
do (can be prepared according to the color of ceramic tile adhesive
for caulking directly, if not for caulking, then need caulking
processing after ceramic tile adhesive action)
It is convenient for construction to add water directly, saving
construction time and dosage;
The adhesive strength is 6-8 times of cement mortar, anti-aging
performance is good, do not fall off, do not crack, do not empty
muster shell, no worries.
No water seepage, no lack of alkali, good water retention, within a
few hours after the construction, can be adjusted at will, less
than 3mm thin layer construction has a certain anti-water
performance.
Process flow of FIER tile adhesive manufacturing plant production line:
1. The sand source is river sand, which needs to be dried and
screened before storage; If mechanical sand is used, it needs to be
broken, screened and then broken again, and then screened and
graded for storage.
2. Cementing materials, fillers and additives shall be sent into
the corresponding warehouse.
3. Carry out batching measurements according to the tiles chemical
formula.
4. Put all kinds of raw materials into the mixer for stirring and
mixing.
5. The tile adhesive mortar of finished products is sent to the
warehouse for product packaging or bulk.
6. Deliver products to the site. Dry mixed mortar in bulk must be
transported in bulk silos or special bulk transport vehicles to
prevent segregation and affect the construction quality.
7. Dry mixed tile adhesive mortar is put into a mortar mixer and
mixed with water in proportion.
8. Use the special mortar pump to transport the mixed mortar to the
construction site or directly carry out spraying construction on
site.
You can choose the Types of FIER Tile adhesive production line
1.Tower-type tile adhesive production line
Tower-type tile adhesive manufacturing plant design is reasonable,
height can be designed according to the user’s site situation,
It has the characteristics of a moderate investment, short construction period, and quick investment effect.
Equipment investment according to customer demand output per hour up to 5-15 tons,
Only 3-5 operators are needed to complete the production.
The equipment is 6-10 meters high and covers an area of 20-30 square meters.
2.Horizontal tile adhesive plant.
1. Adopt a multi-layer screw belt to stir, the material moves as a
whole, and the yield is high. The average stirring time is 5-10
minutes;
2. Suitable for junior investors, small investment, high return.
3, low maintenance rate, bearing at both ends of the mixer, the
material is not easy to enter, equipped with cycloid needle wheel
reducer, low maintenance rate.
4. High uniformity of mixing, multi-directional movement of
materials, multi-layer screw belt, no dead Angle of mixing, high
uniformity, good quality;
5. Small floor space, an automatic feeding device, improve work
efficiency.
6. Circular barrel structure, smooth operation, low noise, long
service life, wide application range;
7, using internal and external multi-layer screw back stirring, no
dead Angle, mixing speed, high uniformity;
8, the mixer adopts the screw to lift the feeding, the feeding port
and the ground level, feeding convenient;
FIER Dry mortar plant Specifications:
Models | FM05 | FM10 | FM15 | FM20 | FM30 |
Production Capacity (T/H ) | 5 | 10 | 15 | 20 | 30 |
Control System | Semi-auto/Full-auto | Semi-auto/Full-auto | Semi-auto/Full-auto | Semi-auto/Full-auto | Semi-auto/Full-auto |
Models | FM40 | FM50 | FM60 | FM80 | FM100 |
Production Capacity (T/H ) | 40 | 50 | 60 | 80 | 100 |
Control System | Semi-auto/Full-auto | Semi-auto/Full-auto | Semi-auto/Full-auto | Semi-auto/Full-auto | Semi-auto/Full-auto |
You can choose the appropriate output according to your needs.
Fier Putty making machine working principle:
Different kinds of dry powder materials enter into the dry powder
mixing equipment according to the formula ratio after calculation,
the materials are mixed under the push of the ribbon spiral blade.
The outer tape pushes the material from one end to the other, while
the inner tape moves the material in the opposite direction.
The material is repeatedly mixed evenly and then discharged from
the outlet. The working liquid to be mixed is input by the joint
and moved in the material in the barrel.
Fier putty making machine has higher mixing speed, higher
uniformity, and lower maintenance rate than the traditional
vertical dry powder mixer.
Principle of Fier tile adhesive production line:
The finished sand is lifted by the bucket and loaded into the
storage bin respectively.
The powder is fed into the respective silos by the bulk tanker, and
the additives and other bagged materials are lifted by the additive
hoist and manually added to the respective silos.
Materials in sand silos, powder silos, and additive silos are
discharged into their respective measuring buckets one by one
through the screw conveyor for cumulative measurement.
When all kinds of materials are measured, start the screw conveyor
to discharge all kinds of materials into the bucket conveyor at the
same time, and then unload them into the intermediate storage
hopper through lifting; When needed, the mixture of the
intermediate storage hopper is directly discharged into the mixer
for mixing.
After a certain period of time, the finished product is discharged
from the discharge port of the mixer.
It is stored in the finished product transition bucket and is
packed by the packaging machine, or sent to the finished product
warehouse by the screw conveyor and the bucket lift machine to
complete a working cycle.
how to make your own tile adhesive
Ceramic tile adhesive mortar is mainly bonding, often label tiles
chemical formula or tile adhesive chemical ratio, prevents cutting
corners. It’s essentially mortar.
Mortar mainly consists of cement mortar, mixed mortar, and
occasionally white ash mortar.
1. Adding cement to mortar is called “cement mortar”.
Cement mortar is made of cement and sand by mixing proportionally,
it can mix the mortar with higher strength. Cement mortar is
generally applied to foundations, basements that are soaked in
water for a long time and masonry structures that bear large
external forces.
2. Adding lime (paste) is called “white mortar” or “lime
mortar”.It’s called plastering mortar
Lime mortar is a mortar made of mortar mixed by mortar and sand in
proportion.
3. Add cement and white ash, called “mixed mortar”.
Mixed mortar is generally made of cement, mortar, sand and is generally used for masonry above the ground. Due to the addition of stone plaster, mixed mortar changes the workability of factory mortar, which is more convenient to operate and conducive to the density and efficiency of masonry.
Dry Mix Mortar Manufacturing Plant Manufacturer and supplier -Fier
Machinery
Fier Machinery can provide you with a full-automatic and
semi-automatic dry mix mortar plant/ production line.
1. Accept customer consultation, according to customer needs,
determine the scale of operation, provide plant plans;
2. To provide the project design, process design for customers,
suitable for your machine and equipment selection plan, timely for
the consideration
Customer to provide relevant technical documents;
3. According to your special needs, design and manufacture
products, training technical operators for your preliminary design
and construction design.
4. We can send engineers to your country according to your needs
If you are looking for a dry mortar plant manufacturer, Fier
Machinery will be your best choice.
We can supply you with the best turn-key solution for your dry mix
mortar plant.
and we welcome you to visit our office and factory at any time!
Seeing is believing!
Choice Fier, work with us, build your further!
Ask your free quote now!
