Active Member
|
[China]
Address: Room E216, Chuangyi Park, Fuqian Road, Guanlan Zhangge, Longhua District, Shenzhen, China
Contact name:Zhou
Lenolink Telecommunication Co.,Ltd |
|
|
GSM DCS WCDMA Band Mobile Signal Repeater 27dBm Coverage 3000sqm
75dB Gain
Description:
Consumer booster is to support any mobile systems to help end users
to improve mobile signals for better signal coverage. It is
designed to support coverage area up to 100~5000 square meters with
proper engineering.
Lenolink provides a series of products to support different application and customize your requirement. And the products can support single, dual and triple systems with one housing.
Specifications:
| Specifications: | ||||
| Parameters | Uplink | Downlink | ||
| Frequency Range | LTE800 (Band 20) | 832 ~ 862MHz | 791 ~ 821MHz | |
| GSM&EGSM (Band 8) | 880 ~ 915MHz | 925 ~ 960MHz | ||
| DCS (Band 3) | 1710 ~ 1785MHz | 1805 ~ 1880MHz | ||
| WCDMA (Band 1) | 1920 ~ 1980MHz | 2110 ~ 2170MHz | ||
| LTE2600 (Band 7) | 2500~2570MHz | 2620 ~ 2690MHz | ||
| Operation Bandwidth (-3dB) | Wide Band | |||
| Maximum Gain | JUP-27-TB | ≥75dB | ≥80dB | |
| JUP-30-TB | ≥75dB | ≥80dB | ||
| Output Power | JUP-27-TB | ≥20dBm | ≥27dBm | |
| JUP-30-TB | ≥23dBm | ≥30dBm | ||
| MGC (Manual Gain Control) | 31dB range/1dB step | |||
| AGC (Automatic Gain Control) | ≧25dB | |||
| Spurious Emission | 9KHz~1GHz | ≦ -36dBm | ||
| 1GHz~12.75GHz | ≦ -30dBm | |||
| Noise Figure | ≤ 6dB | |||
| VSWR | ≦2.0 | |||
| Group Delay | ≤1μs | |||
| LED Alarm | Power LED | DC ON/OFF | ||
| System LED | Alarm Red when ALC control over 15dB | |||
| RF Connector | N-Female | |||
| Impedance | 50Ω | |||
Specification:
Design Advantage
1. Support wide band to cover all operators.
2. Manual gain control (MGC) available for both uplink and down
link to adjust the gain value for proper coverage during
installation or maintenance.
3. To maintain safe and specific output signal levels and give
alarms on self-oscillation, the repeater has built-in AGC and ALC
circuits, which can automatically control the gain of the repeater
depending upon the strength of input signals.
4. Auto shut off design available for both uplink and downlink to
avoid serious interference to network effectively when the repeater
is in deep self-oscillation or very strong input power.
5. Very low power consumption.
6. Support five band in one housing.
Our factory:
