Rohde & Schwarz ZNA43 VNA Vector Network Analyzer 10 MHz to 43.5GHz four port

Masters the most challenging measurement tasks

Masters the most challenging measurement tasks

The R&S®ZNA vector network analyzers are the high-end series of the R&S VNA portfolio: excellent RF-performance is combined with a wide range of software features and a unique hardware concept. The touch-only operation together with the DUT-centric approach makes the R&S®ZNA to a powerful, universal and compact measurement system for characterizing both, passive and active devices.

Rohde & Schwarz ZNA43 VNA Vector Network Analyzer 10 MHz to 43.5GHz four port

Key Facts:

10 MHz to 26.5/43.5/50/67 GHz (R&S®ZNA26/43/50/67)

Two or four port models available

Excellent RF-performance

Up to four integrated sources

Unique and intuitive touch-only operation

The R&S®ZNA features exceptional stability, low trace noise and excellent raw data, making it a perfect choice for development and production applications that require high accuracy, e.g. for developing and producing components and modules for A&D and satellite applications. The R&S®ZNA offers four internal, phase coherent sources, allowing independent control of the signal's frequency at each port as well as phase measurements on mixers. It provides two internal local oscillator (LO) sources, a true multichannel receiver architecture, pulse generators and modulators, an internal combiner, selectable reference

signal access points, preamplifiers and comprehensive trigger and synchronization capabilities. These hardware features make the R&S®ZNA a universal, compact test system for active and passive device characterization. Even intermodulation measurements on mixers and receivers can be performed without external signal sources, minimizing test time and simplifying test configuration. Thanks to the phase coherent digital sources and receivers, no reference mixers are needed for mixer phase measurements, and test setups are configured just as easily as for non-frequency-converting S-parameter measurements.

Spectrum analysis option

► DUT characterization and spurious search without reconnecting the DUT to a spectrum analyzer Group delay measurements on frequency converters with embedded LOs

► Reliable, straightforward satellite receiver measurements High dynamic range

► Dynamic range of 147 dB (typ.) and up to 170 dB (typ., with options)

► Characterization of high-rejection filters

► Short test times and low trace noise Outstanding receiver sensitivity

► Noise floor < –120 dBm (spec.) 1)

► Noise level down to –157 dBm (typ., with options) 2) Exceptional source and receiver linearity

► 0.03 dB receiver linearity in the range from –50 dBm to 0 dBm

► Accurate amplifier testing even at very high and low power levels Wide power sweep range

► Power sweep range of 100 dB (typ.)

► Versatile compression measurements Low trace noise

► Trace noise of < 0.001 dB (at 1 kHz IF bandwidth)

► Accurate, highly reproducible measurements DUT-centric operating concept

► Easy startup, short configuration times Compact instrument, quiet operation

► Acoustic noise as low as 42 dB(A)

► Small footprint, low noise pollution

Operation using touch gestures Users can operate the R&S®ZNA via two independent touchscreens: ▶ Innovative control panel on the right instead of mechanical keys which can wear out over time ▶ 12.1" touch display on the left for configuring and displaying measurements The dual-screen operating concept offers utmost flexibility in configuring measurements. Touch gestures are used to zoom, move traces and add markers. Traces, channels and diagrams can be dragged and dropped to arrange them in any desired combination. The control panel on the right can, among other things, be used to display macros, remote control commands and auxiliary tools. Three alternatives to arrive at the desired setup 1. Conventional approach For general configuration and for basic measurement quantities, such as S-parameters, power and ratios, users can take the conventional approach to configure measurements on the R&S®ZNA. They can select the parameters for a desired setup, e.g. power parameters, the number of points, and the measurement type and measurement quantity.

4-port model with four internal sources The R&S®ZNA is available with up to four internal sources (R&S®ZNAxx-B31) option, 3rd and 4th internal source for 4-port models). The user ­benefits from a powerful, compact system that can even perform intermodulation measurements on mixers and receivers with two converter stages. The digitally controlled, phase coherent and phase repeatable sources allow phase measurements on mixers and converters without external reference mixers.

HARDWARE OPTIONS

Description Applications and benefits Hardware option

1) Direct source and receiver access

►With start frequency down to 100 kHz 2)

►Supports reversed coupler configuration

►Facilitates external test setups for high-power measurements across a wide frequency range

►Reversed coupler configuration increases dynamic range and reduces system noise figure R&S®ZNAxx-B16 R&S®ZNA 4‑port model with up to four internal sources

►No external sources means flexible configuration and short measurement times

►Flexible-to-configure, compact test setups, e.g. for DUTs with two converter stages R&S®ZNAxx-B33) 2nd internal LO source for 4-port R&S®ZNA model

►For simultaneous measurement of two different frequencies (e.g. RF and IF signal of mixers)

►Additional RF source (in combination with R&S®ZNA-B8 mmWave converter LO output)

►Fast mixer and converter measurements

►Very low trace noise with frequency-converting measurements

►General-purpose RF source up to 26.5 GHz (e.g. to provide LO signal for external mixers) R&S®ZNA-B5 2nd internal RF source and 2nd internal LO source for 2-port R&S®ZNA model R&S®ZNA with 2 test ports supports:

►Intermodulation measurements

►Group delay on embedded LO (satellite) converters (LNB), T/R modules

►Mixer tests (with R&S®ZNA-B8 for LO) R&S®ZNA-B523) Four/eight true receivers (no multiplexing)

►Reliable multichannel phase and antenna measurements Provided as standard in base unit (direct receiver access requires R&S®ZNAxx-B16) Direct IF access, I/O ports switchable as inputs or outputs, with 2 GHz analog IF bandwidth (output) and 1 GHz analog IF bandwidth (input) Enhanced flexibility and sensitivity, e.g. when used in antenna test systems

►Provides direct access to up to eight phase coherent receivers

►Supports compact mmWave converter setups R&S®ZNA-B26 Eight internal pulse generators and four internal pulse modulators

►For measurements on pulsed signals and for flexible system integration

►R&S®ZNA-B7 increases the number of wave quantities that can be captured in parallel with R&S®ZNA-K7 R&S®ZNA-K7, R&S®ZNAxx-B4n4), R&S ZNA-B7 Enhanced trigger and control functions (three additional trigger inputs, four trigger outputs, four pulse control I/O ports, ready for trigger, busy, RF interlock control) 5)

►Universal system adaptation and easy system integration

►High reference frequency for low phase noise R&S®ZNA-B91

FAQ:
1.Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below .

​