Wall Attached Unit Platfrom Retractable Bleacher Seating Solution For Indoor Stadium

Suitable Retractable Bleacher Seating Solution for Indoor Stadium

Quick Detail:

Description

1) Comfort Profile: The Seat and the back have been designed with anatomically contoured seat surface using blow molded construction that allows form-fit deflection for maximum spectator comfort.

2) Seat Modules: 460mm minimum spacing, blow-molded, high density polyethylene modules in mono tone colors provided with a scuff resistant textured.

3) Number Plates: Seat module shall have recessed pockets to accept seat number plates.

4) Melody Chair metal brackets are bolted to the plywood decks at the centre's detailed on the drawing. Bolts with Nyloc Nuts and washers are to be used.

Features

1) starting with an economical nose mounting seat with a folding back and also can be installed with a folding mechanism and tip-up base

2) Integrated ergonomically designed for superior comfort

3) Its simplicity within its design allows for greater flexibility

4) Blow moulded construction for greater strength and confort

Platfrom Type

1) Travelling Unit: Power operated to manage the space to create a better atmosphere. Effortless movement forward and backward.

2) Freestanding Unit: For some buildings, there are permanent large columns or week loading rear wall, the freestanding units is the ideal solution.

3) Integral Dolly: Ideal for high tier units, the integral lifting mechanism allows you to move multiple portable sections without additional equipment. Four mechanical screw jacks lift the unit and 12 large wheels allow for effortless transportation of your bleacher.

4) Portable Dolly: It is the most economical for large number of small portable sections. Two dollies are required to move one section.

Accessories

1) Front Rail: Can be provided 800mm high above deck (for better sightline), steel rails with tubular supports and intermediate members. Standard Front rails if required shall be 1000mm. Location detailed on drawings.

2) Aisle Lights: Strip lights to be installed on the underside of the nosing at the in line with the Aisle Step Locations.

3) Carpeted Decks: Provide at decks and steps carpet as selected. Color to be of manufacturer's standard selection.

4) Gap Closures: Operating clearance gaps between sections shall be covered with removable thresholds. The thresholds shall be manufactured from rubber or an Aluminum Section, retained by an oversize self-centering spline.