Active Member
|
[China]
Address: No33 Wangshan Road, Green Island Economic Development Zone, Shijiazhuang, China
Contact name:
Hebei Kaixiang Electrical Technology Co., Ltd |
|
|
Automatic 1000KVA AC Genset Load Bank Load Bank Cabinet Grey Casing
Color
Product description
1.our load bank an accurately test output power and load capacity
with all kinds of generators.
2.System consists of testing/control and load bank, mainly includes
AC load bank, data capture system, auto load/unload control system,
heat dissipation device, assist control and PC software.
3.User can control load bank through local control panel, also
through software
Technical Parameter
| Rating Voltage/Frequency | 400VAC/50Hz, 3 phase 4 wire, |
| Voltage range | 400v 50hz ±10% |
| Max Rated power | Apparent Power: 1000kVA |
| Load Resolution | Resistive load:1.2.2.5.10.10.20.50.100.200.200.200kw |
| Load Tolerance (each step) | ±5% |
| Load Tolerance(overall) | ±3% |
| Display Precision | 0.5 class |
| Control Power | AC380VAC/50Hz,3 phase 4 wire |
| Wire Connection | Load power supply input——Copper bar (star coupling) |
| Communication Interface | RS485, |
| Casing Dimensions and Cooling | about 4000*2350*2591mm (length*width*height) Forced air cooling,Horizontal inlet air,Vertical cooling |
| Weight | About 3600kgs/set |
| Transportation | Hoisting, there are lifting lug in top of casing |
| Casing Color | Grey(RAL7035) |
| Ambient Temperature | -10℃～+50℃ |
| Relative Humidity | ≤95% |
| Altitude | ≤1500 meter |
| Atmospheric Pressure | 86～106kPa |
| Contactor | Schneider |
| Fuse | DELIXI |
| MCU | INFINEON |
| Data processing software | Kaixiang(self-developed) |
| Alloy Resistance | Kaixiang(self-developed) |
Product Advantage
Real-time parameter: Current, voltage, power, power factor,
frequency, time, etc could be displayed by software.
Safety monitoring: User can know the working conditions of load
bank through software indicating light. When in abnormal stop
protection, software will indicate the reasons of stopping.
Data collection interval: the min saving interval is 2 seconds.
Data saving and in query: testing data could be saved in software,
user can query at any time.
Application
Manufacturers of standby power generators commonly use load banks
to test and tune newly assembled units. When the generator has been
set up in a test cell within the factory, a test engineer uses the
load bank to apply a discrete, selectable electrical load to the
generator and measure the response stability and endurance. During
this process, the test engineer calibrates and adjusts the
generator performance to ensure it meets the intended product
specifications and tolerances.
