Active Member
|
[China]
Address: No33 Wangshan Road, Green Island Economic Development Zone, Shijiazhuang, China
Contact name:
Hebei Kaixiang Electrical Technology Co., Ltd |
|
|
Good Performance And Frequency 400V 800KW AC Load Bank In Stock
Product Description
The agreement includes technical standard of function, parameters, frame, and resistor of AC400-800kW Automatic Load Bank. It could test precise output power and load capacity to provide a scientific and efficient solution for high power generator set.
Technical Parameters
| Rating Voltage/Frequency | 800Kw at 400VAC, 3 phase 4 wire, 50 Hz, 230V-Ph |
| Max Load Power | Resistive load:800kW |
| Load Steps | 12 steps, Resistive load:1kW,2kW,2kW,5kW,10kW,10kW,20kW,50kW, 100kW, 200kW, 200kW, 200kW min load step: 1 kW |
| PF(Power Factor) | 1 |
| Load Accuracy (each step) | ±5% |
| Load Accuracy (overall) | 3% |
| Display Precision | 0.5 grade |
| Wire Connection | Load power supply input——star coupling Control power supply input——terminal block |
| Control Power | 380VAC, 3 phase 4 wire, 50 Hz, phase voltage220V |
| Insulation | F |
| Way of Working | Continuous Work |
| Cooling | Fan forced cooling, horizontal inlet air and vertical outlet cooling |
| Casing Color | Grey(RAL7035) |
| Dimensions | 1600 mm*2400mm*2100mm (length*wide*high) |
| Weight | About 1300kgs |
| Temperature | -10℃～+50℃ |
| Relative Humidity | ≤95% |
| Altitude | ≤2500 meter |
| Contactor | Schneider |
| Fuse | DELIXI |
| Alloy Resistance | (self-developed) |
Product Advantage
1. The unit is designed in mobile for easy use during generator load testing, electrical and marine load testing.
2. digital meter displays the line voltage, line ampere, frequcy, power factor(optional) and
power measurements.
3. Digital metering
4. Large load capacity
5. Supporting whole year operation
6. Up to 55°C ambient Operation Tempresure
7. Indoor /outdoor, NEMA 1 enclosure only
Application
KX Load Banks can be used to satisfy the requirements for emergency stand-by power systems. These requirements concern acceptance testing and periodic on-site testing and maintenance of emergency and stand-by power systems. The essence of the requirements is that emergency and stand-by power systems are to be tested under load.
