Active Member
|
[China]
Address: No33 Wangshan Road, Green Island Economic Development Zone, Shijiazhuang, China
Contact name:
Hebei Kaixiang Electrical Technology Co., Ltd |
|
|
10.5KV 3MW Dummy Load Bank 3 Phase AC Variable For Generator
Testing
Product Description
The system can be used with a computer to realize the intelligent
control, automatically completing the special test to all
electrical parameters of generating set and generating tables,
graphs, and supporting the print, comprehensively from the
cumbersome manual operation to provide scientific and efficient
detection means for the power generating sets.
Technical Parameters
| Rating voltage/frequency | 10.5kV, 3 phase 50Hz |
| Max Load Power | Resistive Load: 3000kW |
| Load Resolution | Resistive Load: 6steps, 100kW,200kW,300kW,700kW,800kW,900kW |
| Power Factor | 1 |
| Load Tolerance | ±5% |
| Load Tolerance (overall) | ±3% |
| Fan &Control Voltage | External AC 3 phase 4 line, 380V/50Hz |
| Wire Connection | Load bank input——Copper bar (star coupling ”Y”) |
| Communication Interface | RS485,RS232 |
| Insulation | F |
| Max Protection Grade | IP54 |
| Duty Cycle | Continuous |
| Cooling | Forced air cooling, by Axial Fan; horizontal inlet air, vertical exhaust cooling |
| Enclosure | Container type,with a ladder, air inlet and outlet with mesh enclosure and protection door |
| Internal Lighting | Adequate internal lighting will be provided |
| Transportation | Hoisting, there are lifting lug in top of casing |
| Color | Grey RAL7035 or as required |
| Dimensions | About 6058mm*2438mm*2591mm(L*W*H) |
| Ambient Temperature | -10℃~+50℃ |
| Relative Humidity | ≤95% |
| Atmospheric Pressure | 86~106kPa |
| Contactor | Xiguang |
| Fuse | Chuantai |
| Alloy Resistor | (self-developing) |
| Data Processing Software | (self-developing) |
Technology Advantages
System can work with PC software to realize intelligent operation,
automatically finish the parameters testing, and create testing
data table, curves and reports that can be printed, reduce a lot of
manual operation.
Application
Load Banks are used with Engine Generators, Battery Systems, UPS Systems, Inverters, Ground Power Units, Auxiliary Power Units, Aircraft Power Generators, Wind Generators, and Hydro Generators.
