Home Companies Xiamen WangQin Chemical Technology Co., Ltd.

Self Drying High Hardness Transparency Nano Silicon Floor Coatings

Xiamen WangQin Chemical Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: GOLDEN BAY WEALTH CENTER, HULI HI-TECH PARK, XIAMEN, CHINA

Contact name:Tessa Li

Inquir Now

Xiamen WangQin Chemical Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Self Drying High Hardness Transparency Nano Silicon Floor Coatings

Country/Region china
City & Province xiamen fujian
Categories Paint & Coatings
InquireNow

Product Details

Self Drying High Hardness Transparency Nano Silicon Floor Coatings

 

 

Product Introduction

 

WQ-0132 uses special nanotechnology to synthesize nano protective coatings with excellent hardness, dirt resistance, high temperature resistance, wear resistance and skid resistance by spraying, rolling coating and rubbing. The particle size of WQ-0132 is about 30-50nm, which can produce chemical bond with the surface of substrate, which makes it have excellent permeability and adhesion. It can achieve long-term waterproof, oil-proof, acid-base resistant, dirt proof, moisture-proof, cloud proof, chemical resistance and self-cleaning.

 

WQ-WL0132 is a high hardness nano silicon paint cured at normal temperature produced from the raw materials imported from Japan.Due to high density 0-Si-O structures in its main chains,this product is coated on the base material by spraying,dip-coating,roller coating,etc,aked or dried at normal temperature and cured to obtain a film with good physical properties,such as high hardness,high transparency,good insulativity,and good chemical properties,such as good high low temperature resistance,rub resistance,oxidation resistance,radiation resistance,corrosion resistance,low temperature not tendering,water repellent,anti-moisture,demoulding and ventilating,non-toxic,chemical resistance,etc.

 

 

  Composition

 

Conc. wt.%IngredientCAS NO.
8-10%silica7631-86-9
12%-13%Siloxane1185-55-3
15%-18%Organosilicone resin67763-03-5
35%-40%Propylene glycol monoethyl ether1569-02-4
10%-15%Butyl acetate123-86-4

 

   Additional Isopropyl alcohol may be formed by reaction with moisture.

 

 

Features:

 

1. Very high hardness,7H-9H,excellent resistance to solvents,including alcohol,ketone,and esters.

2. High self-crosslinking density,similar to nano structures,super strong water proof and fire proof performance,salt fog resistance,mouldproof,anti-microbial,impermeability,ultraviolet resistance,etc.

3. Resistance to 20% concentrated sulphuric acid and concentrated hydrochloric acid,10%caustic soda,and strong polar solvents.

4. Very low surface tension,hydrophobic,high self-cleaning and soiling resistance(water contact angle of resin surface:80°).

5. Good temperature resistance,between-40℃and 250℃,resistance to cigarette end burn,instant high temperature resistance of about 600℃,excellent electrical insulating properties,air drying,one component cross-linked curing,and strong adhesion.

6. Good chemical resistance,soiling resistance,resin hardness,and weather resistance

 

 

Applications:

 

1. All floors: Concrete, stone, tile, epoxy, PU, PVC, log floor and terrazzo/ground floor / tile / Stone / polyurethane / Wood /acrylic / UV paint / metal.

2. This product is suitable for surface glossy overprint and protection of all kinds of top grade products,especially painting on coating the polar colored coating surfaces,it can be used as an additive in all kinds of paints and coatings,such as baking varnish/UV/thermoplastic hydroxy acrylic air-dry paint,etc.

 

This product can be applied by roller coating,brush coating and spraying.

 

 

Basic Functions

 

Test ltems

Test Results

Test Method

Pencil Hardness (Gouge Hardness)7HCNS 10757(1995)
Taber Abrasion (g)(Wheel: CS-10; Load: 1000g, 500 cycles)0.007CNS 10757(1995)
Wash ability-(Steel Wool#0000)load 1kg,Area 1*1cm, 800 cycles)800 timesCNS 10757(1995}
Friction TestDry: Over 1.0
Wet: Over 0.9
ASTMD1894-14
Heat Resistance (300°C 1 hour)No Cracks, No PeelingCNS 10757(1995)
Resistance to Boiling Water (3 hrs.)No EffectCNS 10757(1995)
Stain Resistance (Black Tea, Coffee, Crayon, Lipstick, Marker Pen)No EffectCNS 10757(1995)
Solvent Wipe Test (MEK/IPA/Toluene, 1000 times)No EffectASTMD4752-03
Non-toxic Test (Eight Heave Metals)No DetectedCNS 4797-2
Permeable (Oil)Less 0.2CNS10757
Permeable (Pure Water)Less 0.4CNS10757
Chemical Resistance (Saturation NACL, Room temp. 1000 hrs.)No EffectCNS 10757(1995)
Chemical Resistance (MEK/Toluene/IPA, Room Temp. 1000 hrs.)No EffectCNS 10757(1995)
Acid Resistance (30%H2S04, Room Temp. 500 hrs.)No EffectCNS 10757(1995)
Alkali Resistance (20%NAOH, Room Temp. 500 hrs.)No EffectCNS 10757(1995)

.

 

Packaging and Storage

 

packing:25kg/barrel

It should be placed in a cool and ventilated place with a shelf life of 1 year

Hot Products

High Hardness Nano Densifier Sealing For Concrete Floor Product Description WL-0180 is a kind of ...
Self Drying High Hardness Transparency Nano Silicon Floor Coatings Product Introduction WQ-0132 uses ...
Stain-Resistantl Nano Protective Lacquer For Concrete Stones Ceramic Tiles Product Introduction The ...
Enhancing Hardness Sealing Curing Agent Hardener For Concrete Floors Product Introduction WL-0170 is ...
High Hardness Water Based Silicone Resin For Ceramic Coatings And Decorative Topcoat Introduction WL...
High Hardness Silicone Resin WL-0132 Descriptipn WL-0132 is a kind of solvent based self-drying ...