GGG40 Flange Type DN1200 Resilient Seated Check Valve

Gate Valve Flange Type DN40 ~ DN 1200 Durable Resilient Seated Check Valve

Characteristics:

1,the bottom of the pipe diameter the same light hearth seat design, does not produce debris siltation, more reliable seal.

2,the valve plate with the overall quality of rubber coated,advanced rubber vulcanization after curing technology allows the gate to ensure accurate geometry, and rubber and ductile iron

covered with solid, not falling.

3,the valve body using non-toxic epoxy resin coating, excellent corrosion resistance, to prevent secondary pollution of drinking water.

4,valve stem 0 three-ring friction is small, lightweight switch,no leakage.

5,the body material used QT450-10, high strength, light weight, long service life...

 
Resilient Seated Check Valve Specifications:

Resilient Seated Check Valve FEATURES 

⊙ Treating with rubber 

Both inner and outer are coated with advanced knowledge of rubber vulcanization then making 

sure of the elasticity of rubber ,and make sure the exact geometry dimension. Rubber and ductile

 cast iron valve hand together hardly. This can avoid fall-off due to long-term use. 

⊙ Anti- corrosion 

Both inner and outer are coated with non-toxic powder epoxy resin to strengthen the capacity of Corrosion resisting and raise the quality 

of water supply. 

⊙ Ruggedization 

The older ductile iron valve is easy to rupture after being impacted by nonego. It can stop 

rupture depend on the good mechanics capability of ductile iron . 

⊙ Three “○” sealed ring 

With the three “O” – rings, the leakage can be greatly reduced and the “O” – ring can be 

replaced under this condition with pressure and without stopping water. The thrust axletree 

reduces the frictional resistance and lowers the operational torque. And it can be switch seal 

ring without opening and closing. 

⊙ Rigid round body 

The body is founded minutely, the rigid geometry size ensure inner sealing of valve without 

any process. 

⊙ Light weight 

This body is made of ductile iron, it is 20%-30% lighter than the olds. Easily to fixing and 

servicing. 

APPLICABLE STANDARDS 
 
⊙ American Standard 
Design to ANSI/AWWA C509 
Face to face dimension to ASME B16.10-2000(ISO 3 series) 
Flange and drilling To SME/ANSI B16.42-1998 

Resilient seated non rising stem British standard, outline and connecting dimensions 

according to BS5163,(ISO 3 series);BS4504.3.2-89(10BAR);                                             

Resilient seated non rising stem British standard, outline and connecting dimensions

 according to BS5163,(ISO 3 series);BS4504.3.2-89(16BAR);