Active Member
|
[China]
Address: No.159 Jiugan road Sijing industrial zone Songjiang District Shanghai, China
Contact name:Steve
Shanghai kangquan Valve Co. Ltd. |
|
|
L Shaped Cup Pressure Regulator Valve 400mm Durable Sealing Performance
1.The valve hydraulic cylinder piston rod is L-shaped cups,sealing
performance, durability,
the valve seal pair is also rubber seal,no leakage.
2.Can also power two to four-way solenoid valve for remote control.
3.Easy to operate,safe and reliable.
4.It is a quick source or air source by a hydraulic actuator angle
for the cut-off type valve
| Technical Specification | |||
| Nominal Pressure:0.6MPa,1.0MPa | |||
| DN:80~400mm | |||
| Minimum Driving Pressure:0.15MPa | |||
| Medium: water,sewage | |||
| Work temperature: 0~80℃ | |||
| Design Standard:BS5163 | |||
| Flange Standard:BS EN 1092 | |||
| OTHER STANDARD ARE AVAILABLE UPON REQUEST. |
| Dimension Unit:mm | |||||||
| DN 80 100 150 200 250 300 350 400 | |||||||
| L 480 500 620 735 805 940 1100 1200 | |||||||
| L1 135 145 175 225 260 280 305 340 | |||||||
| L2 125 125 145 185 205 245 270 310 |
Angle Type Diaphragm Sludge Valve is widely used in water treatment plant to drainage away the dirty water and the waste water.
Features
low wear
light weight
easy and quick to open
easy to fix and service
| Technical Specification | |||
| Nominal Pressure:0.6MPa,1.0MPa | |||
| DN:50~300mm | |||
| Medium: water,sewage | |||
| Work temperature: 0~80℃ | |||
| Design Standard:BS5163 | |||
| Flange Standard:BS EN 1092 | |||
| OTHER STANDARD ARE AVAILABLE UPON REQUEST. |
| Part Material | |||||||
| No. | PART NAME | Material | |||||
| 1 | Body | Cast Iron | |||||
| 2 | Bonnet | Ductile iron | |||||
| 3 | Spring | Stainless Steel | |||||
| 4 | Spring Plate | Stainless Steel | |||||
| 5 | Diaphragm | Nylon Rubber | |||||
| Dimension Unit:mm | |||||||
| DN 50 65 80 100 125 150 200 250 300 | |||||||
| H 125 145 155 175 200 225 275 325 375 |
The utility model discloses a hydraulic air cylinder braking angle type mud valve which comprises a hydraulic oil cylinder. The hydraulic oil cylinder is fixedly installed on the angle type mud valve. Guide grooves are formed in a wall of the hydraulic oil cylinder. Sliding feet are arranged on a piston edge in the oil cylinder and are matched with the guide grooves in a sliding mode. A piston rod is fixedly connected with a piston and penetrates and contacts the wall of the angle type mud valve in the sliding mode. A rubber ring is fixedly arranged on the middle portion of the wall of the angle type mud valve and is sleeved on the piston rod. The end portion of the piston rod is connected with a valve plate. Rubber is coated on the valve plate. The valve plate is connected with a guide cylinder. A reverse lug is arranged on the end portion of the piston rod and is connected with the guide cylinder is the sliding mode. A spring is arranged between an end face of the piston rod and the valve plate. The end face of the piston rod is in elastic connection with the valve plate. Hydraulic pressure or pneumatic force is used as a starting force so that opening speed is fast, resistance coefficient is small, opening and closing time is short, sealing performance reliability is good, the rubber ring plays a role of protecting the angle type mud valve and a hole penetrating through the piston rod is preventing from becoming bigger
