Customize LED Screen Processor Taurus Series Multimedia Player TB50

Taurus Series Multimedia Player TB50 Specifications

Company Profile

We are HK Brilliance Tech Co., LTD. Our headquater is located on HK, China; and our factory is located on Shenzhen and Guangzhou, China. We have over 10 years manufacturing experience. We provide wide option of model of this type of product and we support customization for products and brand and logo.

Our products enjoy quick sale all over the world. We have more than 3 steps and procedure for quality check and quality assurance system. Each of products will ensure over 48h final performacne testing. With good quality, client always give good repute for our products.

Change History

  . Loading capacity up to 1,300,000 pixels

    Maximum width: 4096 pixels

    Maximum height: 4096 pixels

  . 2x Gigabit Ethernet ports

    These two ports serve as primary by default.

    Users can also set one as primary and the other as backup.

In synchronous mode, video sources input from this connector can be scaled to fit the entire screen automatically.

. 2x sensor connectors

Connect to brightness sensors or temperature and humidity sensors.

Control

. 1x USB 3.0 (Type A) port

Allows for USB playback and firmware upgrade over USB.

. 1x USB (Type B) port

Connects to the control computer for content publishing and screen control.

. 1x Gigabit Ethernet port

Connects to the control computer, a LAN or

public network for content publishing and screen control.

Performance

. Powerful processing capacity

- Quad-core ARMA55 processor @1.8 GHz

- Support for H.264/H.265 4K@60Hz video decoding

- 1 GB of onboard RAM

- 16 GB of internal storage

. Flawless playback

2x 4K, 6x 1080p, 10x 720p, or 20x 360p video playback

Functionality

. All-round control plans

- Enables users to publish content and

control screens from a computer, mobile phone, or tablet.

- Allows users to publish content and control screens from anywhere, anytime.

- Allows users to monitor screens from anywhere, anytime.

. Switching between Wi-FiAP and Wi-Fi STA

- In Wi-FiAP mode, the user terminal

connects to the built-in Wi-Fi hotspot of the TB50. The default SSID is “AP+Last 8

digits of SN” and the default password is “12345678” .

- In Wi-Fi STA mode, the user terminal and the TB50 are connected to the Wi-Fi

hotspot of a router.

. Synchronous and asynchronous modes

- In asynchronous mode, the internal video source works.

- In synchronous mode, the video source input from the HDMI connector works.

. Synchronous playback across multiple screens

- NTP time synchronization

- GPS time synchronization (The specified 4G module must be installed.)

- RF time synchronization (The specified RF module must be installed.)

. Support for 4G modules

The TB50 ships without a 4G module. Users

have to purchase 4G modules separately if

needed.

Network connection priority: Wired network > Wi-

Fi network > 4G network

When multiple types of networks are available,

the TB50 will choose a signal automatically

according to the priority.

Appearance

Front Panel

Rear Panel

Indicators

Dimensions

Specifications

The amount of power consumption may vary depending on various factors such as product settings, usage, and environment.

Media Decoding Specifications

Image

Video

Notes and cautions

 FCC Caution

  Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the                  equipment.

  This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful        interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 . Reorient or relocate the receiving antenna.

 . Increase the separation between the equipment and receiver.

 . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 . Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC Caution

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause

undesired operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,

Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit

acceptertout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.

Cet équipement est conforme àl'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.

Radiation Exposure Statement

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Cetéquipementestconforme Canada limitesd'exposition aux radiations dans un environnement non contrôlé. Cetéquipementdoitêtreinstalléet utiliséàdistance minimum de 20cm entre le radiateur et votre corps.

Others

This is Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

Certificate

​​

Payment & Packing Transport

1.Transfer deposit when confirm order, and pay for balance when goods is ready.

2.Accept EXW, FOB, CIF, etc based on your request.