Stainless Steel 1400mm Diameter 30kw Disc Dryer

CZPG-1400-7 Coil Dryer material is carbon steel,Disc Dryer

1,With the saturated steam, hot water or heat conducting oil as heating medium, the vacuum rake dryer is an energy-saving and indirectheating drying equipment, which can be intermittently operated to dry the materials in vacuum condition.

2,It can be mainly used for thedrying of slurry, paste, granular, powder, fiber, easily oxidized, heat sensitive materials.

Working Principle :

    The motor drives the grinding disc to rotate through the reducer, and the material falls into the center of the grinding disc from the inlet through the lock air feeder, and at the same time, hot air enters the mill from the air inlet. With the rotation of the grinding disc, the material moves to the edge of the grinding disc under the action of centrifugal force. When passing through the annular groove on the grinding disc, it is crushed and crushed by the grinding roller. The crushed material is carried by the high-speed airflow of the wind ring on the edge of the grinding disc. The particles directly fall on the grinding disc and re-grind. When the material in the airflow passes through the upper separator, under the action of the rotating rotor, the coarse powder falls from the cone to the grinding disc and re-grinds.

    The dust collection device is the product, and the material containing moisture is dried during the contact process with the hot air flow. By adjusting the temperature of the hot air, it can meet the requirements of materials with different humidity and reach the required product moisture. By adjusting the separator, the required thickness of different products can be achieved. It is precisely because of the continuous reform and innovation of products that the machine can meet the various needs of different users, and it can gain a foothold in many fields such as the cement industry, chemical industry, water conservancy industry, power plant industry, and ceramic industry, and has won praise and praise from many users. praise! The preparatory work before the installation of the dryer is the foundation acceptance, which mainly checks the foundation concrete pouring quality and size position deviation.

    In terms of appearance, the foundation surface should be clean, free of oil, dust, and debris, no exposed steel bars, no cracks or corners, no residual shells in the expected holes, and other casting defects. The basic size and position deviation should meet the following requirements: the outline size and the basic coordinate position, the vertical and horizontal axis error is less than 20mm.