Active Member
|
[China]
Address: 3F,Sixth Plant, Tangzhong Industrial Park, Hengnan Road, Gushu ,Xixiang Town, Baoan District, Shenzhen City, Guangdong, China
Contact name:Candy
Shenzhen Recoda Technologies Limited |
|
|
960P Car Surveillance Camera Front Rear View Night Vision 1.3 Megapixel
Features:
1.3Megapixel;
Aluminium allow housing;
140 degree Wide angle lens;
Cam 2 Option 120dB Real WDR
Strong light inhibition;
Cam1 Build-in IR LED;
Cam1 Audio output.
Specifications:
| Camera 1 |
Image Sensor | 1/3” CMOS AR0130 |
TV System | PAL/NTSC (optional) |
Picture Elements | 1280 (H) x 960 (V) |
Sensitivity | 0 Lux (IR LED On) |
Scanning System | Progressive scan RGB CMOS |
Synchronization | Internal |
S/N Ratio | More than 44dB (AGC Off) |
Auto Gain Control (AGC) | Auto |
Electronic Shutter | Auto |
BLC | Auto |
Infrared Spectrum | 940nm |
Infrared LED | 6 LEDs |
Video Output | 1 Vp-p, 75Ω,AHD |
Audio | Available |
Mirror | Optional |
ICR | N/A |
Noise Redution | 3D |
Dymamic range | 83.5 dB |
Lens | f2.5mm Megapixel |
Pan Adjusting | 0-50° |
Tilt Adjusting | 0-50° |
Power Supply | 9-18V DC |
Power Consumption | 110mA |
Weatherproof/Water Proof | N/A |
Operating Temperature | -30°C to +70°C |
Camera 2 | |
|
|
Image Sensor | 1/3” CMOS AR0130 |
TV System | PAL/NTSC (optional) |
Picture Elements | 1280 (H) x 960 (V) |
Sensitivity | 0.1 Lux/F1.2 |
Scanning System | Progressive scan RGB CMOS |
Synchronization | Internal |
S/N Ratio | More than 44dB (AGC Off) |
Auto Gain Control (AGC) | Auto |
Electronic Shutter | Auto |
BLC | Auto |
Infrared Spectrum | N/A |
Infrared LED | N/A |
Video Output | 1 Vp-p, 75Ω,AHD |
Audio | N/A |
Mirror | Optional |
ICR | N/A |
Noise Redution | 3D |
Dymamic range | 83.5 dB |
Lens | f2.5mm Megapixel |
Pan Adjusting | N/A |
Tilt Adjusting | 0-80° |
Power Supply | 9-18V DC |
Power Consumption | 70mA |
Weatherproof/Water Proof | N/A |
Operating Temperature | -30°C to +70°C |
Product's Image:
Operation Procedures:
1. Adjust the position of (1) to change the angle of inner-forwarding camera 1.
2. Adjust the position of (2) to change the angle of out-forwarding camera 2.
3. Take off the 3M sticker of (3) to fix the whole camera to needed place.
4. Connect the cable as belows.
Packing list:
Camera 1
Instruction manual 1
Hex-key 1
