Active Member
|
[China]
Address: 708, No.218, Changchun Road, Shangcun Community, Gongming Street, Guangming District, Shenzhen
Contact name:Mark
Shenzhen Zhongguanda Technology Co., Ltd. |
|
|
ZGD330 provides maximum protection for vital mission-critical
networks, security applications (electro- medical)and industrial
applications thanks to its outstanding mechanical and electrical
design.
The load is powered continuously by the inverter with a filtered,
stabilized and regulated sine wave supply.
The input and output EMI filters considerably increase the immunity
of the load to mains disturbances and surges.
The ZGD330 uses on-line double conversion technology (VFI) with
isolation transformer on the inverter output.
The ZGD330 is supplied with Watch & Save 3000 software as
standard and can be remotely monitored using the Power Net Guard
system from anywhere in the world. Additional battery extension
packs allow the standard battery routine to be extended up to
several hours.
Application:
Servers,
Local area Network(LAN),
Data centers,
Telecommunications,
Electro-medical equipment
| Model power | ZGD330 10-200KVA | |||||||||||
| 10KVA | 15KVA | 20KVA | 30KVA | 40KVA | 60KVA | 80KVA | 100KVA | 120KVA | 160KVA | 200KVA | ||
| Capacity | 8KW | 12 KW | 16 KW | 24 KW | 32 KW | 48 KW | 64 KW | 80 KW | 96KW | 128 KW | 160 KW | |
| Input | ||||||||||||
| Rated voltage | 380/400/415 Vac three-phase | |||||||||||
| Voltage range | ±20% | |||||||||||
| Frequency range | 45-65Hz | |||||||||||
| Power factor | >0.92with harmonic filter | |||||||||||
| Current harmonic distortion | <5%with harmonic filter | |||||||||||
| Soft Start | 0-100% in10" | |||||||||||
| Bypass Input | ||||||||||||
| Rated voltage | 380/400/415 Vac three-phase | |||||||||||
| Permitted voltage range | ±15%(selectable from ±10% to ±25% from front panel) | |||||||||||
| Rated frequency | 50/60Hz | |||||||||||
| Permitted frequency range | ±2%(selectable from ±1% to ±5% from front panel) | |||||||||||
| Standard features | Back Feed protection; split bypass line | |||||||||||
| Batteries | ||||||||||||
| Type | Maintenance-free lead-acid VRLA AGM / GEL;NICd | |||||||||||
| Battery voltage | 384VDC | 480VDC | ||||||||||
| Maximum recharge current(A) | 0.2×C10 | |||||||||||
| AC ripple voltage | <1% | |||||||||||
| Inverter Output | ||||||||||||
| Number of phases | 3+N | |||||||||||
| Rated voltage(V) | 380Vac | |||||||||||
| Regulation of the output voltage | 380~424Vac phase/neutral(from control panel) | |||||||||||
| Crest factor (Ipeak / Irms) | 3:1 | |||||||||||
| Static stability | ±1% | |||||||||||
| Dynamic stability | ±5% | |||||||||||
| Frequency | 50/60Hz configurable | |||||||||||
| Overload | 110% 125% 150% of the rated current for 5h/10'/1' | |||||||||||
| Frequency stability | ±0.05% on mains failure;±2%(selectable from ±1% to ±5%)with mains supply present | |||||||||||
| Remote signaling | Volt free contacts | |||||||||||
| Remote controls | EPO and Bypass | |||||||||||
| Communication | RS232 + romote contacts | |||||||||||
| Operation temperature | 0ºC/ + 40ºC | |||||||||||
| Relative humidity | <95% non condensing | |||||||||||
| Noise | 54dBA at 1m | 50-65dBA at 1m | ||||||||||
| Protection degree | IP20 | |||||||||||
| Efficiency smart mode | up to 98% | |||||||||||
| Compliance | Safety:EN 62040-1-1(Directive 2006/95/EC); EMC:6200-2(Directive 2004/108/EC) | |||||||||||
