Dynamic Corporation Limited |
Verified Suppliers
|
|
DCL-Ex05E~60E parameters.pdf
360 Degree Modulating Type Explosion Proof Electric Actuator
50Nm-600Nm
Features:
Description
DCL anti-explosion electric actuators’ enclosure are special casted by larger tonnage die casting machine than common series actuator, to ensure even very small stomas are not existed. The shell thickness is thicker than common shell to suffer gas explosion inside actuator. The quality of cylinder stop surface is the key part to guarantee explosion proof. Scratches, mistake tolerances, shorter stop length, rust points and cracks are all definitely not allowed on this surface. Thus all shells are 100% checked by DCL after shipping from suppliers.
Actuator are officially tested by CSA to meet ATEX, UL and CSA standard and can be used in different regions all around the world, including Europe, north America and any other places.
Specification:
Type | Ex05E | Ex10E | Ex20E | Ex40E | Ex60E |
Power | AC110V/AC220V | ||||
Output Torque | 50Nm | 100Nm | 200Nm | 400Nm | 600Nm |
Acting Time | 20S | 30S | 30S | 30S | 45S |
Turning Angle | 0-90° | 0-90° | 0-90° | 0-90° | 0-90° |
Motor Power | 10W | 25W | 40W | 90W | 90W |
Rated Current | 0.24/0.15A | 0.57/0.30A | 0.63/0.35A | 1.12/0.64A | 1.18/0.67A |
Total Weight | 3.0kg | 5.0kg | 5.5kg | 9.5kg | 10.0kg |
Input Signal | 4-20mADC,1-5VDC,2-10VDC | ||||
Output Singal | 4-20mADC | ||||
Basic Error | not more than ±1% | ||||
Reciprocating Error | not more than 1% | ||||
Dead Space | 0.5%-5.0% adjustable | ||||
Damping Characteristic | 0 times | ||||
Repeating Error in Actuator | ≤1% | ||||
Insulating Resistance | 100MΩ/500VDC | ||||
Withstand Voltage Class | 1500VAC 1minutes | ||||
Protection Class | IP68 | ||||
Explosive-proof grade | Exd II CT4Gb | ||||
Installation Angle | 360°at any angle | ||||
Electric Interface | 2-M20*1.5 explosion-proof plug,clients should install corresponding explosion-proof cable connector when using according to the cable selected. | ||||
Ambient Temperature | -20℃~+60℃ | ||||
Optional Function | Over-torque protector/Dehumidify Heater/Passive contact switch | ||||
Remark | Any other input or output signal needed, please specified in purchase order. |