Dynamic Corporation Limited |
Verified Suppliers
|
|
Explosion proof electric compact actuator with ExdⅡC T4 grade for Zone 1 / Division 1
Features
Description
Actuator can be used for over 90% explosive gas environment except for colliery. Motors and electronics are fire treated. The machining precise of the connection surface are strictly controlled and inspected from supplier to ensure the flameproof gap is small enough to block spark inside actuator. Aluminum housing is hard die casted with larger tonnage than common series electric actuator to be more dense and can suffer much larger explosive pressure.
All connection surfaces between enclosures are designed per ATEX and UL standard and precisely machined & tested before assembling to ensure explosion proof grade. Actuator is easy to install using standard ISO5211 multi-flange mounting and double square drive.
Specification
Type | Ex05E | Ex10E | Ex20E | Ex40E | Ex60E |
Power | AC110V/AC220V | ||||
Output Torque | 50Nm | 100Nm | 200Nm | 400Nm | 600Nm |
Acting Time | 20S | 30S | 30S | 30S | 45S |
Turning Angle | 0-90° | 0-90° | 0-90° | 0-90° | 0-90° |
Motor Power | 10W | 25W | 40W | 90W | 90W |
Rated Current | 0.24/0.15A | 0.57/0.30A | 0.63/0.35A | 1.12/0.64A | 1.18/0.67A |
Total Weight | 3.0kg | 5.0kg | 5.5kg | 9.5kg | 10.0kg |
Input Signal | 4-20mADC,1-5VDC,2-10VDC | ||||
Output Singal | 4-20mADC | ||||
Basic Error | not more than ±1% | ||||
Reciprocating Error | not more than 1% | ||||
Dead Space | 0.5%-5.0% adjustable | ||||
Damping Characteristic | 0 times | ||||
Repeating Error in Actuator | ≤1% | ||||
Insulating Resistance | 100MΩ/500VDC | ||||
Withstand Voltage Class | 1500VAC 1minutes | ||||
Protection Class | IP67 | ||||
Explosive-proof grade | Exd II BT4Gb | ||||
Installation Angle | 360°at any angle | ||||
Electric Interface | 2-M20*1.5 explosion-proof plug,clients should install corresponding explosion-proof cable connector when using according to the cable selected. | ||||
Ambient Temperature | -20℃~+60℃ | ||||
Optional Function | Over-torque protector/Dehumidify Heater/Passive contact switch | ||||
Remark | Any other input or output signal needed, please specified in purchase order. |