Density Meter Foam Testing Equipment , 10 seconds Measurement Time

5.Features and devices:
· Gold-plated ceramic capacitor sensor;
·The electronic balance and density test device can realize the density test of liquid and solid;
· It can work with a constant temperature water tank and measure the specific gravity of the liquid at the required temperature;
· Density direct reading, reducing cumbersome calculations;
· Standard RS232 data output function, easy to connect PC and printer. ;
· Automatic zero tracking, buzzer alarm, overload alarm function
· Dimensions, 270*270*270; Weight; 6.5KG
· One-piece sink size, 165*115*85
· Blue backlit liquid crystal display;
This machine adopts one-piece injection molding measuring frame, integrated injection molding transparent water tank, easy assembly, wear resistance, anti-corrosion, and can clearly observe the sample in the medium.
 
6.Standard accessories:
1>main machine, 2>sinks, 3>measuring tables, 4> tweezers, 5> instructions, 6>weights, 7> windproof dust cover, 8> measuring particle accessories,9> measuring floating parts, 10> power transformer
 
7.Saturated water method sponge density measurement steps:
1. Put the sample into the measuring table, measure the weight in the air, press the M key to remember.
2. After saturating the sample, put it into the measuring table, measure the weight in the air, and press the M key to remember.
3. After saturating the sample, put it into the water, measure the weight of the water, press the M key to remember, and directly display the density value.
Press 0 to display the wet density, apparent porosity, water absorption, open pore volume, plugging volume, and total porosity.
 
Non-absorbent material measurement steps:
1. Put the sample into the measuring table, measure the weight in the air, press the M key to remember.
The sample is completely immersed in water, the weight of the water is measured, and the M key is used to memorize the density value directly.