Home Companies Shenzhen Miray Communication Technology Co., Ltd.

FCC SFP Transceiver Modules , Aruba 1g Sfp Lc Lx 10km Smf Transceiver J4859d

Active Member

Contact Us

[China]

Address: A2315, Hezheng Huiyicheng, Laodong Community, Xixiang, Baoan, Shenzhen, China

Contact name:Jenny

Shenzhen Miray Communication Technology Co., Ltd.

FCC SFP Transceiver Modules , Aruba 1g Sfp Lc Lx 10km Smf Transceiver J4859d

Country/Region	china
City & Province	shenzhen
Categories	Mobile Phone Straps

Product Details

1G SFP LX for HPE Aruba J4859D 1000BASE-LX SFP 1310nm 20km LC DOM Transceiver Module

Description

The small form-factor pluggable (sfp transceiver ) is a compact, hot-pluggable transceiver used for both telecommunication and data communications applications. The form factor and electrical interface are specified by a multi-source agreement (MSA). It interfaces a network device motherboard (for a switch, router, media converter or similar device) to a fiber optic or copper networking cable. It is a popular industry format jointly developed and supported by many network component vendors.

Miray's SFP-GE-LX20 Small Form Factor Pluggable SFP transceivers are compliant with the current SFP Multi-Source Agreement (MSA) Specification. The high performance uncooled 1310nm FP transmitter and high sensitivity PIN receiver provide superior performance for Fast Ethernet 100BASE-LX, Gigabit Ethernet 1000BASE-LX and Fiber Channel applications up to SMF 20km optical links.

Features

Supports data rates from 100Mb/s to 1.25Gb/s
Transmission distance up to 550m on MMF OM2 and 150km over SMF
Compliant with SFP MSA
Compliant with IEEE Std 802.3
Compliant with FC-PI 13.0
Single +3.3V power supply
Built-in digital diagnostic functions
RoHS-6 compliant
Operating Case Temperature: Standard: 0~70°C; Extended: -20~85°C ;Industrial: -40~85°C

Applications

Distributed multi-processing
Switch to switch interface
High speed I/O for file server
Bus extension application
Channel extender, data storage

Recommended Operating Environment

Parameter		Symbol	Min.	Typical	Max.	Unit
Case operating Temperature	Industrial	T_C	-40		85	°C
	Extended		-5		85	°C
	Commercial		0		+70	°C
Supply Voltage		V_CC	3.135		3.465	V
Supply Current		Icc			300	mA
Inrush Current		I_surge			Icc+30	mA
Maximum Power		P_max			1	W

Transmitter Electro-optical Characteristics (T_OP = -40 to 85°C, VCC = 3.135 to 3.465 Volts)

Parameters	Symbol	Min.	Typ.	Max.	Unit	Note
Operating Date Rate	DR	125		1250	Mb/s
Optical Launch Power	Po	-9		-3	dBm	1
Optical Center Wavelength	λc	1260	1310	1355	nm
Spectral Width (RMS)	Δλ			3	nm
Optical Extinction Ratio	ER	9			dB
Optical Eye Mask		IEEE802.3ah
Relative Intensity Noise	RIN			-120	dB/Hz
Differential Data Input Swing	VIN	180		1200	mV
TX Disable Input Voltage-Low (TX ON)	TDISVL	GND		0.8	V
TX Disable Input Voltage-High (TX OFF)	TDISVH	2.0		Vcc	V
TX Fault Output Voltage-Low (TX Normal)	TFLTVL	GND		0.8	V
TX Fault Output Voltage-High (TX Fault)	TFLTVH	2.0		Vcc	V

Receiver Electro-optical Characteristics (T_OP = -40 to 85°C, VCC = 3.135 to 3.465 Volts)

Parameters	Symbol	Min.	Typ.	Max.	Unit	Note
Operating Date Rate	DR	125		1250	Mb/s
Receiver Sensitivity @1250Mbps	PIN_min			-24	dBm	1
Receiver Sensitivity @125Mbps				-25	dBm	1
Maximum Input Power	PIN_max	-3			dBm
Optical Center Wavelength	λc	1260		1620	nm
LOS De-Assert	LOSD			-25	dBm
LOS Assert	LOSA	-35			dBm
LOS Hysteresis	LOSHY	0.5			dB
Differential Data Output Swing	VOUT	600		1000	mV
Receiver LOS Signal Output Voltage-Low	LOSVL	GND		0.8	V
Receiver LOS Signal Output Voltage-High	LOSVH	2.0		Vcc	V