Home Companies Shenzhen Miray Communication Technology Co., Ltd.

Juniper Compatible QSFP Transceiver Module 40g ER4 lc transceiver 1310nm

Active Member

Contact Us

[China]

Address: A2315, Hezheng Huiyicheng, Laodong Community, Xixiang, Baoan, Shenzhen, China

Contact name:Jenny

Shenzhen Miray Communication Technology Co., Ltd.

Juniper Compatible QSFP Transceiver Module 40g ER4 lc transceiver 1310nm

Country/Region	china
City & Province	shenzhen
Categories	Network Cards

Product Details

QSFP-40G-ER4 QSFP+ Optical Transceiver Module Juniper Compatible

Description

Miray’s 40GE QSFP+ ER4 40km Optical Transceiver modules are designed for using in 40 Gigabit Ethernet and 4X10G OTN client interfaces over single mode fiber. They are compliant with the QSFP+ MSA, IEEE 802.3bm 40GBASE-ER4, and OTU3 requirements. The Gigalight technology enables the integration of 4 transmitters, 4 receivers and an optical MUX/DeMUX into a small form factor package.

Features

Hot-pluggable QSFP+ form factor
4 channels full-duplex transceiver module
Data rate up to 41.25Gbps
Compliant with QSFP+ MSA and IEEE 802.3bm 40GBASE-ER4
4x 10Gb/s uncooled DML CWDM transmitter and APD receiver
Reach up to 40km over SMF
Power consumption < 3.5W
Duplex LC receptacles
XLPPI electrical interface
Built-in digital diagnostic functionality
Commercial operating case temperature range: 0°C to 70°C
3.3V power supply voltage
RoHS-6 compliant (lead-free)

Recommended Operating Environment

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	V_cc	3.13	3.3	3.47	V
Operating Case Temperature	T_c	0		70	ºC
Data Rate Per Lane	fd	9.95	10.3125	11.15	Gb/s
Humidity	Rh	10		90	%
Power Dissipation	P_m			3.5	W
Fiber Bend Radius	R_b	3			cm

Optical Parameters(T_OP = -40 to 85°C, VCC = 3.135 to 3.465 Volts)

Parameter	Symbol	Min	Typical	Max	Unit
Transmitter
Signaling Speed per Lane		9.95	10.3	11.15	GBd
Center Wavelength	λc	1264.5	1271	1277.5	nm
		1284.5	1291	1297.5
		1304.5	1311	1317.5
		1324.5	1331	1337.5
Total Average Launch Power	P_out			10.5	dBm
Transmit OMA per Lane		-1.3		5	dBm
Average Optical power per lane	TXPX	-2.7		4.5	dBm
Difference in launch power between any two lanes (OMA)				4.7	dB
Transmitter Dispersion Penalty	TDP			2.6	dB
Launch power (OMA) minus TDP per lane		-0.5			dBm
Extinction Ratio	ER	4.5			dB
Sidemode Suppression ratio	SSRmin	30			dB
Average Launch Power of OFF Transmitter (each lane)	P_off			-30	dB
Relative Intensity Noise	RIN			-128	dB/Hz
Transmitter Eye Mask definition: X1, X2, X3, Y1, Y2, Y3	{0.25, 0.4, 0.45, 0.25, 0.28, 0.4}
Jitter Generation		Per OTL3.4 section 4.14.1
Receiver
Signaling Speed per Lane		9.95		11.15	GBd
Center Wavelength	λ_c	1264.5	1271	1277.5	nm
		1284.5	1291	1297.5
		1304.5	1311	1317.5
		1324.5	1331	1337.5
Receive Power (OMA) per Lane	RxOMA			-4.0	dBm
Average Receive Power per Lane	RXPx	-21.2		-4.5	dBm
Receiver Sensitivity (OMA) per Lane(@ PRBS 231-1 and BER=5×E-5)	Rxsens			-19	dBm
Stressed Receiver Sensitivity (OMA)per Lane(@ PRBS 231-1 and BER=10-12)	SRS			-16.8	dBm
Damage Threshold per Lane	PMAX			-8	dBm
Return Loss	RL			-26	dB
Jitter Tolerance		Per OTL3.4, G.8251
Vertical eye closure penalty, per lane				2.2	dB
Receive electrical 3 dB upper cutoff frequency, per lane				12.3	GHz
LOS Assert	LOS_A	-35			dBm
LOS De-Assert – OMA	LOS_D			-19	dBm
LOS Hysteresis	LOS_H	0.5			dB