Active Member
|
[China]
Address: A2315, Hezheng Huiyicheng, Laodong Community, Xixiang, Baoan, Shenzhen, China
Contact name:Jenny
Shenzhen Miray Communication Technology Co., Ltd. |
|
|
Miray’s QSFP-40G-AOC1m series are active optical cables (AOC) that allows bi-directional 40Gbps transmission suitable for Ethernet 40GBASE-SR4 and InfiniBand QDR application and other high-throughput data network, with advantages such as high speed, high density, low latency, low power consumption and light weight.
Quad Small Form-factor Pluggable (QSFP)
40GBASE-SR4 compliant
QDR, DDR, SDR (Infiniband) compliant
Bi-directional parallel link
10.3125Gb/s per lane, x4 channels
Up to 100m
Low profile connectors
Low power consumption
Bundle multi-mode fiber array
850nm VCSEL four array
PIN diode four array
Hot-Pluggable
I2C management interface
From 0 to 70 degree case temperature
3.3V power supply voltage
Electrical 38-pin connector
Parameter | Conditions | Min | Typ. | Max | Units |
Data rate per lane | 8B/10BCoding, 64B/66B Coding | 1 | 10.3125 | 10.5 | Gbps |
3.3V Supply Voltage |
| 3.13 | 3.3 | 3.47 | V |
Power supply noise including ripples | 1kHz to frequency of operation mersured at VCC_HOST |
|
| 50 | mVpp |
Case temperature |
| 0 | 35 | 70 | ℃ |
Parameter | Symbol | Min. | Typ. | Max. | Units | Notes | |
ModSelL | Module Select | VOL | 0 | - | 0.8 | V |
|
Module Unselect | VOH | 2.5 | - | VCC | V |
| |
LPMode | Low Power Mode | VIL | 0 | - | 0.8 | V |
|
Normal Operation | VIH | 2.5 | - | VCC+0.3 | V |
| |
ResetL | Reset | VIL | 0 | - | 0.8 | V |
|
Normal Operation | VIH | 2.5 | - | VCC+0.3 | V |
| |
ModPrsL | Normal Operation | VOL | 0 | - | 0.4 | V |
|
IntL | Interrupt | VOL | 0 | - | 0.4 | V |
|
Normal Operation | VoH | 2.4 | - | VCC | V |
| |
Electrical transmitter Characteristics | |||||||
Differential Date Input Swing | Vout | 200 | - | 1600 | mV |
| |
Output Differential Impedance | ZD | 90 | 100 | 110 | Ω |
| |
Electrical Receiver Characteristics | |||||||
Differential Data Output Swing | Vin,P-P | 350 | - | 800 | mVPP |
| |
Bit Error Rate | BER |
|
| E-12 |
| 1 | |
Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | ||
Part No. | Product Type | Rate | Media Type | Wavelength | Reach | Commercial Temp. | Industrial Temp. |
QSFP-40G-AOC1M | QSFP+ AOC | 40G | MM | 850nm | 1m | 0~70℃ | -40~85℃ |
QSFP-40G-AOC2M | QSFP+ AOC | 40G | MM | 850nm | 2m | 0~70℃ | -40~85℃ |
QSFP-40G-AOC3M | QSFP+ AOC | 40G | MM | 850nm | 3m | 0~70℃ | -40~85℃ |
QSFP-40G-AOC5M | QSFP+ AOC | 40G | MM | 850nm | 5m | 0~70℃ | -40~85℃ |
QSFP-40G-AOC7M | QSFP+ AOC | 40G | MM | 850nm | 7m | 0~70℃ | -40~85℃ |
QSFP-40G-AOC10M | QSFP+ AOC | 40G | MM | 850nm | 10m | 0~70℃ | -40~85℃ |
QSFP-40G-AOC20M | QSFP+ AOC | 40G | MM | 850nm | 20m | 0~70℃ | -40~85℃ |
QSFP-40G-AOC30M | QSFP+ AOC | 40G | MM | 850nm | 30m | 0~70℃ | -40~85℃ |
QSFP-40G-AOC50M | QSFP+ AOC | 40G | MM | 850nm | 50m | 0~70℃ | -40~85℃ |
QSFP-40G-AOC100M | QSFP+ AOC | 40G | MM | 850nm | 100m | 0~70℃ | -40~85℃ |
