Home Companies Huatong Yuanhang (Beijing) Technology Development Co., Ltd. （HTONETECH）

Hybrid Combined Inverter Charger Solar Controller Inverter 48vdc 80amp

Contact Us

[China]

Trade Verify

Address: 30A, No. 17 Huanke Middle Road, Jinqiao Science and Technology Industrial Base, Tongzhou Park, Zhongguancun Science and Technology Park, Tongzhou District, Beijing

Contact name:

Huatong Yuanhang (Beijing) Technology Development Co., Ltd. （HTONETECH）

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Hybrid Combined Inverter Charger Solar Controller Inverter 48vdc 80amp

Country/Region	china
City & Province	beijing beijing

Product Details

93% efficiency combined inverter charger 48vdc 80amp

Product Description of Combined Inverter Charger

The Inverter Charger Offers A Hybrid System That Combines Solar Energy And Commercial Power While Providing Users With The Flexibility Of Choosing The Form Of Energy According To Their Needs. It Features Mains/Diesel And Solar Charging, Mains Bypass And Inverter Output, And Energy Management And Control, Allowing Users To Maximize Their Use Of Solar Energy While Supplementing With Commercial Power If Needed. This Product Ensures A Reliable And Secure Power Supply With Its High-Quality, High-Stability, And High-Reliability Outputs, Making It Ideal For Use In Solar Energy And Commercial Power/Diesel Generator Hybrid Power Generation Systems.

Product features of Combined Inverter Charger

Two Operating Modes: Battery-Powered Mode And Non-Battery Powered Mode.
Solar Energy Is The Primary Source Of Power When There Is No Battery Storage Available. When Necessary, The Mains Supply Is Used To Supplement, Ensuring The Load Requirements Are Met.
The Lithium Battery Application System Is Perfectly Complemented By The Anti-Surge And Anti-Reverse Protection At The Battery End.
Choose From Three Charging Modes: Solar-Only, Solar Priority, And Solar-Main Power Combination.
Two Ac Output Modes: Mains Supply Priority And Inverter Output Priority.
Using Advanced Mppt Technology, This Inverter Charger Boasts A Tracking Efficiency Of At Least 99.5%, Ensuring Maximum Power Production And Efficiency.
Power Factor Correction (Pfc) Technology To Optimize Ac-Dc Power Charging And Significantly Reduce The Strain On Power Grid Capacity.
Spwm Technology Produces A Pure Sine Wave Output.
The Total Charge And Discharge Current Of The Battery Can Be Preset, Making It Ideal For Occasions Requiring A Battery Current Limit.
The Amount Of Mains Charging Can Be Tailored And Adjusted To Fit Your Needs, With The Ability To Set The Rate Of Mains Charging Current.
Self-Learning Soc Display Function
For Those Seeking To Monitor Remotely, Pairing The Rs485 Communication Interface With Gprs, Wifi, And Other Modules Can Provide An Effective Solution.
Using The Bms-Link Communication Interface And Conversion Module, It Is Possible To Achieve Charge And Discharge Control Via The Bms.

Product Technical Parameters of Combined Inverter Charger

Model	UP5000-HM8042
Rated battery voltage	48VDC
Battery input voltage	43.2~64VDC
Max. battery charge current	80A
Inverter Output
Continuous output power	5000W
Max. surge power (3s)	8000W
Output voltage	220VAC(-6%~+3%), 230VAC(-10%~+3%)
Output frequency	50/60±0.2%
Output waveform	Pure sine wave
Load power factor	0.2-1 (load power ≤ continuous output power)
Total harmonics distortion (THD)	THD≤3% (resistive load)
80% rated output efficiency	92%
Max. rated output efficiency	91%
Max. output efficiency	93%
Switch time	10ms (switch from the utility output to the inverter output) 15ms (switch from the inverter output to the utility output)
Utility Charging
Utility input voltage	176VAC~264VAC(default), 90VAC～280VAC (programmable)
Utility input frequency	40～65Hz
Max. utility charge current	60A(when the utility input voltage is 90VAC~180VAC, the max. utility charge current is 30A)
Solar Charging
Max. PV open circuit voltage	500V (at minimum environment temperature) 440V (25℃ environment temperature)
MPPT voltage range	120~400V
Max. PV input power	4000W
Max. PV charge power	4000W
Max. PV charge current	80A
Equalization voltage	58.4V (default AGM battery type)
Boost voltage	57.6V (default AGM battery type)
Float voltage	55.2V (default AGM battery type)
Low voltage disconnect voltage	43.2V (default AGM battery type)
Tracking efficiency	≥99.5%
Temperature compensate coefficient	-3mV/℃/2V (default)
General
Surge current	95A
No-load consumption	< 1.2A
Standby current	< 0.7A
Mechanical Parameters
Dimensions (H×W×D)	642.5×381.6×149mm
Mounting size	620×300mm
Mounting hole size	Ø10mm
Net weight	19kg
Enclosure	IP30
Environment temperature	-20℃~50℃