Inner Layer: 10-15% Virgin
Middle Layer: 70-80% Recycled
Outer Layer: 10-15% Virgin
Mandrel:
Mould Mouth:
|
[China]
Trade Verify
Address: Beiguan Industrial Park, Qingdao-577, Shandong, China
Contact name:Jenice Chow
QINGDAO SINO-HOLYSON MACHINERY CO., LTD |
|
Verified Suppliers
|
|
|
This HSJ-65/38 HDPE/PP Plastic Pipe Making Machine
This machine is mainly designed for manufacturing HDPE/PP Pipes, which mainly used in irrigation, water supply; MPP Pipes, which mainly uses in electric cable. The extruder can process PP/HDPE granules(Both virgin and Recycled, even with chalk-filled composite). This Line is a HIGHER SPEED Design, output can reach like 400-600kg/hr.
MOULD SIZE: 110-350mm
110mm, 125mm, 150mm, 175mm, 200mm, 225mm, 250mm, 280mm, 300mm, 350mm totally 10 sizes.
The mounted mould on this line is 110-350mm, full set of mould will include every detailed sized mandrel and sizing sleeve.
Standard Design | Higher Speed Design | |||
1. | HSJ-75/36 Single Screw Extruder | HSJ-90/33 Single Screw Extruder | 110kw | |
2. | HSJ-25 Marking Line Extruder | HSJ-30 Marking Line Extruder | ||
3. | Mould | Mould | ||
4. | Vacuum Cooling Water Tank | Vacuum Cooling Tank | 8m | |
5. | Spraying Cooling Water Tank | 1 Piece | Spraying Cooling Water Tank | 2 Pieces |
6. | 3-Caterpillar Traction Machine | 3-Caterpillar Traction Machine | ||
7. | Non-Chips Cutting Machine | |||
8. | Pipe Stacker | 12m | 12m |
HSJ-65/38mm Single Screw Extruder This Extruder is designed specially for processing PP/HDPE Granules, either Virgin Granules or recycled scraps. The Extruder installed with 110kw driving motor , according to the different pipe size, or thickness. Our SCREW is specially designed according to Chemical Characteristic of the granules. It has the advantages of high tenacity, high impact, good bending performance, high temperature resistance, etc.
HSJ-45/36mm Single Screw Extruder: 38CrMoAl, LD:36/1, Special Gradual Design
Extrusion Mould: Size 110-350mm
Diameter: 75mm, 100mm, 125mm, 150(160)mm, 180mm, 200mm, 225mm, 250mm
ABA 3-Layer Mould
you can click here and switch to 3-Layer solutions.
Pipe Stacker This unit is mainly for pipes which cut into pieces, it holds and collects the pipe after the cutting machine. You can pack the pipe into bundles by straps.
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.
