|
[China]
Trade Verify
Address: Changjiang South Road, No.17-17, Wuxi, Jiangsu 214000, CN
Contact name:Rona
WUXI WANLI ADHESION MATERIALS CO., LTD. |
|
Verified Suppliers
|
|
|
Factory Hot Sale Decorative Panels Flat Lamination, White Solid WANLI® PUR-9002.1 with Open Time About 5-6 Minutes, Good Peeling Strength, Good Heat, Humidity and Chemical Resistance.
Wanli® PUR hot melt adhesive PUR-9002.1 for woodworking flat lamination bonding is a single-component reactive PUR hot melt adhesive with 100% solid content. PUR-9002.1 can be used for the lamination of plastic films/aluminized films to wood/wood-plastic materials. PUR-9002.1 has high initial strength and moderate open time. PUR-9002.1 is featured stable viscosity under heating at a certain temperature, high initial bonding strength and final bonding strength. After curing, PUR-9002.1 has good peeling strength, good heat&humidity resistance and chemical resistance.
APPLICATION
Wanli® PUR hot melt adhesive PUR-9002.1 is used for woodworking flat lamination bonding. PUR-9002.1 can be used for the lamination of plastic films/aluminized films to wood/ wood-plastic materials.
| Application Material | Decorative Panels Lamination Bonding |
| Appearance | White Solid |
| Component | PUR (Polyurethane) |
| Application Industry | Woodworking Flat Lamination Bonding |
| Solid Content | 100% |
| Operating Temperature | 130～140 ℃ |
| Melt Viscosity | About 6500mPa·s @140℃(Brookfield-ASTM D3236) |
| Open Time | 5-6min |
| Usage Scope | Lamination of Plastic Films/Aluminized Films to Wood/Wood-plastic Materials |
| Shelf Life | 6 Months |
| Package | 2Kg/Bag, 20Kg/Barrel, 200Kg/Barrel |
FEATURE
Stable viscosity under heating at a certain temperature.
High initial bonding strength and final bonding strength.
PUR-9002.1 has good peeling strength, good heat&humidity resistance and chemical resistance after curing.
USER GUIDE
The package of PUR-9002.1 is suitable for various dispensing equipment.
The recommended operating temperature is 130℃~140℃.
In order to achieve complete curing, it is better to place finished product in a working environment with suitable temperature and humidity (recommended temperature: 23~25 ℃, about 65% relative humidity).
STORAGE
Store the product where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.
