Shijiazhuang An Pump Machinery Co., Ltd |
|
1.Centrifugal slurry pumps
Centrifugal slurry pumps for a range of mill duties, from dirty water to the most difficult water flushed crusher services
The An Pump AM series centrifugal slurry pumps is the world’s standard for the most difficult mill duties. A wide variety of impellers and shaft seals provide a perfect fit for a wide range of applications. The AM pump provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost.
2.BENEFITS OF centrifugal slurry pumps
• Heavy duty construction with through-bolt design
provides ease of maintenance and minimal downtime
• Ductile iron fully lined casing provides
durability, strength, safety, and long service life
• Large diameter, slow turning, high
efficiency impellers designed to achieve maximum wear
life and low operating costs
• Large, open internal passages designed to
reduce internal velocities, maximize wear life and
lower operating costs
• Thick elastomer or alloy bolt-in liners
provide superior corrosion resistance plus offer ease of liner
change-out and interchangeability to reduce
overall maintenance costs and maximize wear life
• Minimal shaft/impeller overhang reduces
shaft deflection and increases packing life
• Cartridge-style bearing assembly allows
for maintenance in a clean environment without removal of
the pump, resulting in reliable operation and prolonged
bearing life
• Grease or oil lubrication bearing assembly
options offer ease of maintenance and reduced downtime
• Optional dry running shaft seal reduces or
eliminates flush water requirements
• Effective expeller prolongs packing life
while reducing or eliminating flush water requirement
• Interchangeability of seal arrangements – full
flush, low flow, centrifugal, or mechanical seals may
be fitted to any sized pump
3.Application of centrifugal slurry pumps
• Ball mill discharge | • Bottom/fly ash, lime grinding | • Coal | • Coarse sand | • Coarse tailings | •Dredging |
• FGD | • Fine tailings | • Flotation | • Heavy media | • Minerals concentrate | • Mineral sands |
• Ni acid slurry | • Oil sands | • Phosphoric acid | • Phosphate matrix | • Process chemical | • Pulp and paper |
• Rod mill discharge | • SAG mill discharge | • Wet crushers |
4.Structure of centrifugal slurry pumps
5.centrifugal slurry pumps Performance data
Model | Max Power (kw) | Material | Clear water performance | Impeller Vane No. | |||
Liner | Impeller | Capacity Q ( m3/h) | Head H ( m) | Speed n (rpm) | |||
1.5/1B-AM | 15 | M | M | 12.6~28.8 | 6~68 | 1200~3800 | 5 |
RU | RU | 10.8~25.2 | 7~52 | 1400~3400 | 3 | ||
1.5/1B-AMH | 30 | M | M | 16.2~34.2 | 25~92 | 1400~2200 | 5 |
2/1.5B-AM | 15 | M | M | 32.4~72 | 6~58 | 1200~3200 | 5 |
RU | RU | 25.2~54 | 5.5~41 | 1000~2600 | |||
3/2C-AM | 30 | M | M | 39.6~86.4 | 12~64 | 1300~2700 | 5 |
RU | RU | 36~75.6 | 13~39 | 1300~2100 | |||
4/3C-AM | 30 | M | M | 86.4~198 | 9~52 | 1000~2200 | 5 |
4/3D-AM | 60 | ||||||
4/3C-AM | 30 | RU | RU | 79.2~180 | 5~34.5 | 800~1800 | 5 |
4/3D-AM | 60 | ||||||
4/3E-AMH | 120 | M | M | 126~252 | 12~97 | 600~1400 | 5 |
6/4D-AM | 60 | M | M | 162~360 | 12~56 | 800~1550 | 5 |
6/4E-AM | 120 | ||||||
6/4D-AM | 60 | RU | RU | 144~324 | 12~45 | 800~1350 | 5 |
6/4E-AM | 120 | ||||||
6/4F-AMH | 260 | M | M | 100~414 | 34~98 | 600~1000 | 5 |
8/6E-AM | 120 | M | M | 360~828 | 10~61 | 500~1140 | 5 |
8/6E-AM | 120 | RU | RU | 324~720 | 7~49 | 400~1000 | 5 |
10/8ST-AM | 560 | M | M | 612~1368 | 11~61 | 400~850 | 5 |
RU | RU | 540~1188 | 12~50 | 400~750 | |||
10/8E-MM | 120 | M | M | 666~1440 | 14~60 | 600~1100 | 5 |
10/8E-MM | 120 | RU | RU | 540~1188 | 10~42 | 500~900 | 5 |
12/10ST-AM | 560 | M | M | 936~1980 | 7~68 | 300~800 | 5 |
M | M | 720~1620 | 7~45 | 300~650 | |||
14/12ST-AM | 560 | M | M | 1260~2772 | 13~63 | 300~600 | 5 |
RU | RU | 1152~2520 | 13~44 | 300~500 |
| ||
16/14ST-AM | 560 | M | M | 1368~3060 | 11~63 | 250~550 | 5 |
16/14TU-AM | 1200 | ||||||
18/16ST-AM | 560 | M | M | 2160~5040 | 8~66 | 200~500 | 5 |
18/16TU-AM | 1200 | ||||||
20/18TU-AM | 1200 | M | M | 2520~5400 | 13~57 | 200~400 | 5 |
6.An Pump Machinery Company to Customers:
1)Quality first. We guaranteed every part of the pump must be inspected closely
2)We can help you select suitable pump model according to your working condition and requirements.
3)We can design the related base or engine for your pumps.
4)Fast delivery time, large quantity of spare parts in stock