Active Member
|
[China]
Address: Fuzhen Industrial Development Zone, Botou City, Hebei Province
Contact name:Manager liu
Botou Xinchen Environmental Protection Equipment Co., Ltd. |
|
|
Industrial Air Pollution Control Jet Mineral Equipment Dust Collector Machine
Model Specification | QDDMC-32 | QDDMC-48 | QDDMC-64 | QDDMC-80 | QDDMC-96 | QDDMC-112 | |
| Filter area(㎡) | 24 | 36 | 48 | 60 | 72 | 84 | |
| Filter speed (m/min) | 1.04~1.67 | 1.15〜1.62 | 1.21~1.74 | l.25~1.67 | I.27〜1.62 | 1.28-1.68 | |
| Air volume (m³/h) | 1500-2400 | 2500-3500 | 3500-5000 | 4500-6000 | 5500-7000 | 6500-8300 | |
| Bag quantity (piece) | 32 | 48 | 64 | 80 | 96 | 112 | |
| Gas consumption (m³/min) | 0.032 | 0.048 | 0.064 | 0.08 | 0.096 | 0.11 | |
| Air inlet concentration(g/m) | 200 | ||||||
| Air inlet concentration(mg/m) | 50 | ||||||
| Injection pressure(MPa) | ().5~0.7 | ||||||
| Negative pressure(Pa) | 5000 | ||||||
| Machine pressure resistance(Pa) | ≤1200 | ||||||
| Pulse valve | Size | 1'' | |||||
| Qty(Piece) | 4 | 6 | 8 | 10 | 12 | 14 | |
| Motor power (KW) | 1.5 | 2.2 | 3.0 | 5.5 | 5.5 | 7.5 | |
| Total weight(kg) | 1350 | 1620 | 1850 | 2360 | 2800 | 3200 | |
Details
1. The structure of Xinchen XMC sub-chamber pulse bag filter:
△ Box body: bag room, pre-cleaning room, clean air room, perforated
plate, filter bag, filter bag frame, the box body is designed to
withstand a pressure of 9000Pa, which is greatly improved compared
with the conventional bag filter;
△ Injection system: main air pipe, injection pipe, pulse valve,
control device, use PLC or special pulse program controller
automatic control device, according to the nature of dust and
working environment, reasonably adjust the cleaning cycle and pulse
spray time to maximize the dust collector Ideal cleaning effect;
△ Ash hopper and ash discharge part: divided into direct
connection form, ash hopper is connected with ash discharge valve
through conveying equipment;
2. According to the change of working environment, Xinchen XMC
sub-chamber pulse bag filter is matched with solenoid valves of
different specifications to adapt to a variety of complex dust
removal environments. Even in the particularly cold northeast and
northwest regions or when the flue gas is below zero, the heat
preservation and heating device needs to be added, and the shell
only needs to be changed slightly without replacing new equipment,
which saves a lot of investment costs for users.
3. Reasonable box structure and automatic control series
effectively improve the working efficiency of the XMC sub-chamber
pulse bag filter. During the working process, the dust-containing
gas enters the expanded ash hopper of the dust collector for
pre-collection, and is evenly distributed through the deflector.
Between each filter bag, the dust is retained on the outer surface
of the filter bag. In order to make the equipment resistance not
exceed 1200Pa, the high-pressure gas is pulsed through the solenoid
valve, so that the compressed air (0.5~0.7MPa) in the air bag is
blown by the hole of the nozzle The sprayed (called primary air)
induces several times the surrounding air (called secondary air)
through the venturi tube into the filter bag and rapidly expands in
an instant, and shakes off the dust along with the opposite
direction of the airflow to achieve a clean dust. purpose.
4. The filter bag of Xinchen XMC sub-chamber pulse bag filter is
generally made of polyester needled felt, and the allowable
temperature can reach 120℃. If the filter bag adopts the high
temperature of Metas above the allowable temperature of the filter
material, the exhaust gas enters the dust collector. Cooling
measures should be taken before. This series of dust collectors has
nine specifications: 60-2, 60-3, 60-4, 60-5, 60-6, 70-5, 70-6,
70-7, 70-8. The specific performance parameters are as follows:
Pictures
