Industrial PTFE Rod Extruder Vertical Ram Extruder Manufacturers teflon rod

Equipment Operating Environment Requirements

The ground of the site is required to be level, and the site load is not less than the design requirements.

The operating platform needs clean space to reduce dust ingress. It is best to have ventilation ducts in the workshop to facilitate ventilation.

Industrial power standard 380V 50Hz 3P, voltage can be customized according to user needs.

The factory is equipped with power distribution cabinets, compressed air and other supporting equipment.

The equipment needs to be equipped with a cooling system. Two buckets / water tanks can be used with a cooling pump to recycle water resources.

The room temperature of the plant should be no more than 28 ° C.

The vertical extrusion equipment extrudes from the top to the bottom. The equipment is installed on the platform or floor with a space height of about 2.8 meters. The effective distance in the longitudinal direction of the device needs to be considered, and a sufficient height must be guaranteed under the fixed circular hole of the device to meet the requirements of the length of the extruded PTFE rod.

Horizontal extrusion equipment needs to consider the effective distance in the horizontal direction of the equipment, and it is necessary to ensure the length of the PTFE rod. The equipment includes a mold length of 4-7 meters (excluding the length of the extruded finished rod), a width of 1.2 meters, a height of 1.8 meters.

The application scenario of a Polymer Rod Ram Extruder Machine can vary depending on the specific needs and industry. However, here are some common application scenarios:

• Plastic and Polymer Industry: Polymer rod ram extruder machines are commonly used in industries that deal with plastic and polymer materials. They are used to extrude molten plastic or polymer materials into solid rods of various shapes and sizes. These rods can then be further processed or used directly in manufacturing applications.
• Manufacturing and Fabrication: Polymer rod ram extruder machines are used in manufacturing and fabrication processes where solid polymer rods are required as raw materials. These rods can be used for various purposes such as making plastic products, construction materials, components for machinery, and more.
• Research and Development: Polymer rod ram extruder machines are also used in research and development laboratories. Scientists and engineers can use these machines to experiment with different types of polymers, test new formulations, and create custom-designed polymer rods for specific applications.
• Recycling Industry: In the recycling industry, polymer rod ram extruder machines can be used to process plastic waste and convert it into reusable polymer rods. This helps in reducing waste and promoting sustainability by giving a new life to discarded plastic materials.

Equipment Installation and Mold Installation Diagram

Equipment And mold Maintenance

Regularly check the height, cleanliness and temperature of the hydraulic oil.

It is recommended to replace the hydraulic oil every six months.

Replaced worn seals timely.

The mold should be cleaned and maintained in time, and the surface should be coated with a thin layer of protective oil.

Carefully handle the temperature sensor of the heating coil, and store it properly.

Accessories And Spare Parts Description

The equipment is composed of main machine, a hydraulic station, a control cabinet, an automatic feeder, holders, heating cavities, molds and other accessories. Equipment necessary accessories are sent to customers with the equipment.

The list of necessary accessories for the equipment is sent to the user with the equipment.

When the user purchases our company’s equipment, in addition to the necessary accessories, we will provide the necessary spare parts to the user to replace and repair the equipment. Spare parts are standard parts and can be purchased in the local market.

Process Guidance

Due to the special technology of the equipment, customers can go to the factory to learn about the installation, commissioning, operation, mold change, maintenance, process guidance of the equipment for free before delivery.

If you are unable to come to our company to study due to inconveniences such as distance, personnel, time, we can arrange for engineers to come to guide the installation, commissioning, operation, mold replacement, maintenance, and process guidance of the equipment under the agreement of the other party.

We can also conduct remote guidance. Users can choose other methods such as telephone, video, email, etc. to learn about equipment installation, commissioning, operation, mold change, maintenance, process guidance, etc.of the equipment.

After Sales Service

From the date of receiving the machine, the warranty period of all machine accessories is one year. We provide free maintenance guidance service during the warranty period.

If there is any problem with the accessories outside the warranty period, please contact us in time to explain the problem, and we will provide follow-up resolution within 24 hours.

If we have a local distributor, we can contact the local distributor for cooperation.

All questions about the equipment can be consulted to us by mail, video, telephone, etc.

Service Phone:+86-0519-83999079

PTFE Rod Line Automatic Feeding Equipment

Vacuum automatic feeding, including compressed air reverse blowing system, start feeding system, wash hose, suction gun, vacuum generator, PCB controller,throughput 30-300 kg/h, diameter 150mm and height 600mm, set automatic feeding time and discharging time, powder flow is controllable, all stainless steel production, intelligent control.

The mixing barrel is 600mm in diameter and 700mm in height, with a 2.2kw reduction motor, a stirring speed of 15-25 turns/min, 8-10mm thick bottom plate, and a feeding capacity of 75-90kg.