Active Member
|
[China]
Address: 1608 Room, No.2 Building, Zhongnan Huanlehui, Dingziqiao Road, Wuchang Dist., Wuhan City, China
Contact name:Luo Zhengang
PSL (WUHAN) SMART EQUIPMENT CO.LTD. |
|
|
Hot-rolled coil uncoiling-slitting-leveling-cut-to- length-cutting-stacking combined production line
Performance and features:
This combined production line consists of uncoiler, feeder, pinch, pre -leveler, scrap shear, Exchanged double slitter, scrap coiler, fine leveler, shear, stacker, uncoiler, etc. it is used for cutting steel coil into required width and length so as to produce material for the manufacturing of steel structure, H beam, automobile beam, pipe welding, cold forming, punching, etc.
The slitting line PLC control ,human-machine interface, according to a high degree of automation ,simple operation and reliable.
It can be used to process metal coils of stainless steel, carbon steel, iron, aluminum, galvanized tape, copper and other materials. It is widely used in welding pipe, automobile, watch, metal building materials, industrial plant and other fields.
Technological process:
Process flowing,
Process flow: feeding ━ uncoiling ━ pressing lead ━ clamping initial correction ━ Rough leveling━ cutting head shear ━ transition worktable ━ guiding ━ Slitting (double blades seat) ━ take-up edge wire ━ Pre separation and press material mechanism ━ transition table ━ guiding ━ leveling ━ cut to length ━ cross cutting ━ blanking ━ discharging ━ manual packing.
Main technical parameters of SLC-(1-6)x1600mm,
| 1. | Material | Hot rolled Carbon steel σb≤460MPa σs≤235MPa |
| 2. | Steel thickness | 1mm~6mm |
| 3. | Steel width | 800~1600mm |
| 4. | Coil O.D | 800~2000mm |
| 5. | Coil I.D | Φ508━Φ610mm━Φ760mm |
| 6. | Steel coil weight | 30T |
| 7. | Knife pivot diameter | Φ320mm； |
| 8. | Blade hardness | HRC56°—59° |
| 9. | Blade specification | Φ320mm×φ480mm×10mm Φ320mm×φ480mm×20mm |
| 10. | Blade Material | H13K |
| 11. | Slit quantity | 6mm/ 24strips 5mm/ 30strips 4mm/ 35strips 3mm/ 40strips |
| 12. | Straightening roller diameter | Φ160mm |
| 13. | Straightening roller distance | Φ188mm |
| 14. | Cut-to-length scape | 2000mm – 6100mm |
| 15. | Slitting width precision | ±0.1mm |
| 16. | Cutting Length precision | ±1.5mm |
| 17. | Diagonal precision | ±1.5mm |
| 18. | Min. Slitting width | 25mm |
| 19. | Slitting speed | 0-50m/min |
| 20. | Leveling speed | 0-28m/min |
| 21. | Max. Slitting thickness | 6mm |
| 22. | Scrap winder width | ≥1.5times of plate thickness |
| 23. | Height of working table | 800mm |
| 24. | Power | 380V/50HZ/3ph |
Technical Parameters:
| Model | 3-12x2200mm | 4-16x2200mm | 5-20x2200mm |
| Thickness(based on steel type Q235) | 3-12mm | 4-16mm | 5-20mm |
| Width | 900-2200mm | 900-2000mm | 900-2200mm |
| Coil weight | 35T | 35T | 35T |
| Finish widith | ≥80mm | ≥100mm | ≥150mm |
| Slitting strips | ≤7 | ≤5 | ≤3 |
| Sitting speed | 0-30m/min | 0-25m/min | 0-20m/min |
| Occupied area | 48x11m | 50x11m | 56x11m |
| Power | 630kw | 820kw | 1050kw |
Main components of the Line:
| No | Name | Quantity |
| 1. | V-type storage platform | 2 units |
| 2. | Hydraulic feeding trolley | 1 unit |
| 3. | Hydraulic double head uncoiler | 1 pair |
| 4. | Hydraulic Press pinch and rough leveling device | 1unit |
| 5. | Hydraulic Shear (cutting plate head) | 1unit |
| 6. | Transition table 1 | 1unit |
| 7. | Hydraulic guide mechanism 1 | 1unit |
| 8. | Slitter (double slitters exchange) | 2units |
| 9. | Hydraulic Scrap winder | 2units |
| 10. | Pre separation and press materials mechanism | 1unit |
| 11. | Transition table 2 | 1unit |
| 12. | Hydraulic guiding mechanism 2 | 1unit |
| 13. | Straightening machine (Leveller) | 1unit |
| 14. | Cut to length mechanism | 1unit |
| 15. | Hydraulic Shear 8x2000mm | 1unit |
| 16. | Hydraulic X-type lifting platform | 1unit |
| 17. | Left/right discharge platform | 2units |
| 18. | Hydraulic system | 1 set |
| 19. | Pneumatic system | 1 set |
| 20. | Electrical control system | 1set |
