Active Member
|
[China]
Address: 2nd Floor, Jinguang Property park, Dafa New Area, Longxi Community, Longgang Dist, Shenzhen, China
Contact name:Lilian
Shenzhen bosen Plastic Products Co. , Ltd. |
|
|
Aluminum Molding Vacuum Forming Machine Parts Plastic With Custom Design
Please kindly note all below item are custom design item according to customer needs, please do not buy directly.
| Product name | Custom design plastic vacuum formed/thermoformed plastic machine cover |
| Material available | ABS,PS,PP,PVC,PET,PET-G,PMMA,PC,HDPE,etc |
| Color | Custom color |
| Material thickness | The material thickness can start from 0.3mm up to 10mm. |
| Surface treatments | silk screen, spray painting, offset printing, chrome plating |
| Mold material | Aluminum mold, copper mold, timber mold, plaster mold according to the product design |
| Size | The maximum size can reach 2200x1500 according to customer design |
Vacuum forming a simple process which you may already be familiar with, where a hot sheet is stretched over a male mold, and vacuum is applied between the sheet and the mold, pulling the sheet tight to the mold. Once it cools, the sheet takes on the shape of the tool. With our 3-dimensional trimming equipment, we can then trim out the finished part with a high degree of accuracy and repeatability. There are an infinite number of applications of this process.
Distortion printing is the process of printing a distorted version of an image onto a sheet of plastic and systematically vacuum forming the sheet on a mold so that specific areas of the printed image appear in corresponding areas of the resulting three-dimensional large part. Bosen plastic utilizes the screen printed plastic sheets in conjunction with vacuum thermoforming expertise to create a molded part containing the proper image displayed on the final product
Vacuum forming is not new industry, display manufacturers have been
using the technology for many years to manufacture lightweight
original retail displays.
Vacuum forming is the process of moulding plastic material over a
relatively inexpensive mould to obtain various shapes that would
otherwise require expensive fabrication, which would be cost
prohibitive for multiple quantities and not as consistent in
quality.
What's new is the process is applying distortion printing. Using
software tools that distort the image so when it is vacuum formed
over a particular shape it looks in perspective, just like the
logos on football filed. The 3 dimension is further enhanced with
our 5 axis routing machine allowing complex shapes to be cut.
Distortion printing is the process of printing a distorted version
of an image onto a sheet of plastic and systematically vacuum
forming the sheet on a mold so that specific areas of the printed
image appear in corresponding areas of the resulting
three-dimensional finished part. At Bosen plastic Co.,Ltd we are
experts in the process, which allows us to deliver the quality and
detail in our products that is expected in the process of
distortion printing to shine through every piece we manufacture.
The overall process of distortion printing at BOSEN is performed
with control, due to the precise computer software, and with
increased speed and repetition. Some key advantages that make
distortion printing a top choice in developing are: design
innovation which leads to improved branding, higher consumer
awareness for our clients, and accuracy in the automated distortion
process that helps to eliminate the expenditures associated with
previous trial and error procedures.
Custom design display project
