Active Member
|
[China]
Address: Rm. 202,Building 7,Zhichuang pneumatic Park,Xikou Town,Fenghua, Ningbo,Zhejiang,China,315502
Contact name:Yang
PRIUS PNEUMATIC COMPANY |
|
|
2/2-way Angle-Seat Valve for medium up to +180°C,Connection, DN
15-100 with Flange Ends
? High flow rate
? Long life cycle
? NC and NO universal actuators with modular
universal accessory program up to control heads
? Deliverable with flow direction below or above seat
? Simple conversion of the control function
Actuator Size
| Port Size | Standard Actuator Size mm | Flange specification:DIN2576 (JB/T82.1) ISO/JIS is also available | ||
| PA | S.S. | AL | ||
| DN15 | 40,50 | 40,50 | 40,50 | |
| DN20 | 50,63,80 | 50,63,90 | 50,63,80 | |
| DN25 | 50,63,80 | 50,63,90 | 50,63,80 | |
| DN32 | 63,80 | 63,90 | 63,80 | |
| DN40 | 63,80 | 63,90 | 63,80 | |
| DN50 | 63,80 | 63,90 | 63,80 | |
| DN65 | 80,100 | 90,125 | 80,100 | |
| DN80 | 100 | 125 | 100 | |
| DN100 | 125 | 125 | 125 | |
Specification
| Model Specification | Nomal Closed | P015NC | P020NC | P025NC | P032NC | P040NC | P050NC | P065NC | P080NC | P100NC |
| Nomal Open | P015NO | P020NO | P025NO | P032NO | P040NO | P050NO | P065NO | P080NO | P100NO | |
| Nomal Closed | S015NC | S020NC | S025NC | S032NC | S040NC | S050NC | S065NC | S080NC | S100NC | |
| Nomal Open | S015NO | S020NO | S025NO | S032NO | S040NO | S050NO | S065NO | S080NO | S100NO | |
| Material of boday/Actuator | S.S304 316/PA | |||||||||
| Seat seal | PTFE/FPM | |||||||||
| Stem seal | PTFE/FPM | |||||||||
| Piston seal | PTFE/FPM/NBR | |||||||||
| Tempreture of Medium | PTFE | -10~200℃ | ||||||||
| FPM | -10~150℃ | |||||||||
| Installing | Downsteam/Upsteam | |||||||||
| Operating Method | Plunger Pilot | |||||||||
| Ambient and fluid | Air,Water,Oil.Steam(50CTS Bellow) | |||||||||
| Port size | G1/2 | G3/4 | G1 | G1 G1/4 | G1 G1/2 | G2 | G2 1/2 | G3 | G4 | |
| Nominal Diameter mm | 13 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | |
| Kv(m3/h) | 4.2 | 8 | 19 | 27.5 | 42 | 55 | 90 | 115 | 200 | |
| Pressure Range Mpa | 0~1.6 | 0~1.6 | 0~1.6 | 0~1.6 | 0~1.6 | 0~1.6 | 0~1.6 | 0~1.6 | 0~1.6 | |
| Min.Control Pressure Mpa | 0.3 | 0.35 | 0.35 | 0.35 | 0.35 | 0.35 | 0.35 | 0.40 | 0.40 | |
| Executor Dimensin mm | 40/50 | 50 | 50/63 | 63 | 63 | 63/90 | 90 | 125 | 125 | |
